2.2.2. Liquid chromatography system
The separation module used was equipped with a quaternary
pump and degasser (model LC-20AT), an autosampler (model
SIL-10A) adjusted to 20lL volume injection, a diode array detector
(model SPD-M20A) with a working wavelength range of
190–230 nm, controlled by a workstation (model CBM-20A) with
data acquisition system LC Solutions software, all manufactured
by Shimadzu Corporation (Kyoto, Japan). For the stationary phase
a C18 column, Hichrom (1504.6 mm, Berkshire, UK) was used.
An isocratic elution procedure was applied to the mobile phases
with a flow rate of 0.6 mL/min. The peaks were identified by their
retention times, comparing the UV–visible spectra and spiking
with standards. A wavelength of 220 nm was selected for the
quantification.
2.2.2 . ระบบ Liquid Chromatography
แยกโมดูลที่ใช้ติดตั้งปั๊มและ Quaternary
degasser ( แบบ lc-20at ) , autosampler ( แบบ
sil-10a ) ปรับ 20ll ฉีดปริมาณ , ไดโอดเรย์ตรวจจับ
( แบบ spd-m20a ) กับการทำงานของ
ช่วงความยาวคลื่น 190 – 230 nm ที่ควบคุมโดยคอมพิวเตอร์ลูกข่าย ( แบบ cbm-20a ) กับระบบเก็บข้อมูลโซลูชั่นซอฟต์แวร์
LC , ผลิตโดย Shimadzu Corporation ( โตเกียว , ญี่ปุ่น ) สำหรับขั้นตอนการ c18 เครื่องเขียนคอลัมน์ hichrom ( 150 4.6 มม. , Berkshire , UK ) คือใช้ .
ขั้นตอนการชะ Isocratic ใช้ระยะเคลื่อนที่
ด้วยอัตราการไหล 0.6 มิลลิลิตร / นาที ยอดมีการระบุเวลาของพวกเขา
เปรียบเทียบและมองเห็นแสงยูวีและการ spiking
ด้วย มาตรฐาน ความยาวคลื่น 800 nm ใช้
ปริมาณ .
การแปล กรุณารอสักครู่..
