The sequence of Kd values for the metals was in agreement with
that widely observed in other solid environmental matrices, such
as soils or inorganic materials used in the remediation of contaminated
soils (Sauvé et al., 2000; González-Núñez et al., 2011). With
respect to the materials, OWH typically exhibited the lowest Kd
values for all of the metals but there was no single material that
systematically exhibited the highest Kd for all of the metals. However,
materials, such as BF, BS, GW and MOW, either exhibited the
highest Kd for a given metal or were in the upper range of Kd values
among the tested materials. Besides this, the Kd,max values, which
are representative for pollutant concentrations in environmental
compartments, permitted to quantify sorption yields over 90%
and often close to 100%, for the majority of metals and materials
combinations, as shown in Fig. 2. Exceptions to this pattern were
OWH, for all metals, and OP and MSW for Ni and Cd. This indicated
that many of the materials tested could also be used to remediate
contaminated waters.
The sequence of Kd values for the metals was in agreement withthat widely observed in other solid environmental matrices, suchas soils or inorganic materials used in the remediation of contaminatedsoils (Sauvé et al., 2000; González-Núñez et al., 2011). Withrespect to the materials, OWH typically exhibited the lowest Kdvalues for all of the metals but there was no single material thatsystematically exhibited the highest Kd for all of the metals. However,materials, such as BF, BS, GW and MOW, either exhibited thehighest Kd for a given metal or were in the upper range of Kd valuesamong the tested materials. Besides this, the Kd,max values, whichare representative for pollutant concentrations in environmentalcompartments, permitted to quantify sorption yields over 90%and often close to 100%, for the majority of metals and materialscombinations, as shown in Fig. 2. Exceptions to this pattern wereOWH, for all metals, and OP and MSW for Ni and Cd. This indicatedthat many of the materials tested could also be used to remediatecontaminated waters.
การแปล กรุณารอสักครู่..
ลำดับของ KD ค่าโลหะคือในข้อตกลงกับ
ที่พบในสิ่งแวดล้อมอื่นๆ อย่างกว้างขวาง เมทริกซ์ ของแข็ง เช่น
เป็นดินหรือวัสดุอนินทรีย์ที่ใช้ในการฟื้นฟูดินที่ปนเปื้อน (
sauv é et al . , 2000 ; gonz . kgm lez-n úñ EZ et al . , 2011 ) กับ
ต่อวัสดุ โอ้ มักจะมีขนาดต่ำสุดค่า
ทั้งหมดของโลหะแต่ไม่มีเดียววัสดุที่
มีระบบแสดงขนาดสูงสุดของโลหะ อย่างไรก็ตาม
วัสดุ เช่น BF , BS , GW และตัดให้มีขนาดสูงสุด
ให้โลหะ หรือ อยู่ในช่วงตอนปลายของ KD ค่า
ในการทดสอบวัสดุ นอกจากนี้ , KD , Max ค่า ซึ่งเป็นตัวแทน ความเข้มข้นของสารมลพิษ
ช่องสิ่งแวดล้อม อนุญาตให้ปริมาณผลผลิตการดูดซับมากกว่า 90 %
และมักจะอยู่ใกล้กับ 100% สำหรับส่วนใหญ่ของโลหะและการผสมวัสดุ
ดังแสดงในรูปที่ 2 รูปแบบนี้มีข้อยกเว้น
โอ้ , โลหะ , และ OP และขยะสำหรับผมและซีดี โดย
ที่หลายของวัสดุทดสอบยังสามารถถูกใช้เพื่อรักษา
ปนเปื้อนน้ำ
การแปล กรุณารอสักครู่..