Five strategies (Experiment A, B, C, D and E) for recovery of PHA were carried out in 10 L bioreactor using
cells which contained 68 wt% PHA and 3 mol% 3HHx. NaCl (8 g/L), NaOH (0.1 M) and ethanol (20% v/v)
were used in the treatments. Separated treatments of NaCl and NaOH with ethanol (Experiment D)
was found as the best strategy with high PHA recovery (95 wt%) and purity (90 wt%). Although, combined
treatments (Experiment B) obtained the highest PHA purity (97 wt%) severe degradation of polymer was
detected. The molecular weight (Mw) was reduced to almost half (2.8 105
Da) compared to polymer
extracted using chloroform (4.6 105
Da). In addition, pre-treatment using NaCl was found to increase
the PHA recovery and purity to 97.7 wt% and 97.5 wt%, respectively. Also, no significant changes in the
PHA recovery and purity were observed when lyophilized cell or wet cell was used. Further characteriza-
tions of recovered polymers were carried out using GPC, DSC, TGA and tensile machine
Five strategies (Experiment A, B, C, D and E) for recovery of PHA were carried out in 10 L bioreactor usingcells which contained 68 wt% PHA and 3 mol% 3HHx. NaCl (8 g/L), NaOH (0.1 M) and ethanol (20% v/v)were used in the treatments. Separated treatments of NaCl and NaOH with ethanol (Experiment D)was found as the best strategy with high PHA recovery (95 wt%) and purity (90 wt%). Although, combinedtreatments (Experiment B) obtained the highest PHA purity (97 wt%) severe degradation of polymer wasdetected. The molecular weight (Mw) was reduced to almost half (2.8 105Da) compared to polymerextracted using chloroform (4.6 105Da). In addition, pre-treatment using NaCl was found to increasethe PHA recovery and purity to 97.7 wt% and 97.5 wt%, respectively. Also, no significant changes in thePHA recovery and purity were observed when lyophilized cell or wet cell was used. Further characteriza-tions of recovered polymers were carried out using GPC, DSC, TGA and tensile machine
การแปล กรุณารอสักครู่..

ห้ากลยุทธ์ (ทดลอง A, B, C, D และ E) สำหรับการกู้คืนของ PHA ได้ดำเนินการใน 10 ลิตรเครื่องปฏิกรณ์ชีวภาพโดยใช้
เซลล์ที่มีน้ำหนัก PHA 68% และ 3% mol 3HHx โซเดียมคลอไรด์ (8 กรัม / ลิตร), NaOH (0.1 เมตร) และเอทานอล (20% v / v)
ถูกนำมาใช้ในการรักษา แยกออกจากการรักษาของโซเดียมคลอไรด์และ NaOH กับเอทานอล (ทดลอง D)
ก็พบว่าเป็นกลยุทธ์ที่ดีที่สุดกับการกู้คืน PHA สูง (95% โดยน้ำหนัก) และความบริสุทธิ์ (90% โดยน้ำหนัก) แม้ว่ารวม
การรักษา (การทดลอง B) ที่ได้รับความบริสุทธิ์ PHA มากที่สุด (97% โดยน้ำหนัก) การย่อยสลายอย่างรุนแรงของพอลิเมอได้รับการ
ตรวจพบ น้ำหนักโมเลกุล (MW) ก็จะลดลงเกือบครึ่งหนึ่ง (2.8? 105
ดา) เมื่อเทียบกับพอลิเมอ
สกัดโดยใช้คลอโรฟอร์ม (4.6? 105
ดา) นอกจากนี้การรักษาก่อนโดยใช้โซเดียมคลอไรด์ที่พบในการเพิ่ม
การฟื้นตัวของ PHA และความบริสุทธิ์ถึง 97.7% โดยน้ำหนักและน้ำหนัก 97.5% ตามลำดับ ยังไม่มีนัยสำคัญการเปลี่ยนแปลงไฟลาดเทใน
การกู้คืน PHA และความบริสุทธิ์ถูกตั้งข้อสังเกตเมื่อแห้งเซลล์หรือเซลล์เปียกถูกนำมาใช้ characteriza- เพิ่มเติม
tions ของโพลิเมอร์กู้คืนได้ดำเนินการโดยใช้ GPC, DSC, TGA และเครื่องดึง
การแปล กรุณารอสักครู่..

ห้ากลยุทธ์ ( แบบ A , B , C , D และ E ) สำหรับการกู้คืนของผา ได้ดำเนินการใน 10 ลิตร ( ใช้
เซลล์ที่มี 68 เปอร์เซ็นต์ ผา 3 โมล % 3hhx . โซเดียมคลอไรด์ ( 8 กรัม / ลิตร ) , NaOH 0.1 M ) และเอทานอล ( 20 % v / v )
) มาใช้ในการรักษา การแยกเกลือและ NaOH ด้วยเอทานอล ( กลุ่ม D )
พบว่าเป็นกลยุทธ์ที่ดีที่สุดกู้คืนผาสูง ( 95 เปอร์เซ็นต์ ) และความบริสุทธิ์ ( 90 เปอร์เซ็นต์โดยน้ำหนัก ) แม้ว่ารวม
รักษา ( ทดลอง B ) ได้รับความบริสุทธิ์ผาที่สูงที่สุด ( 97 เปอร์เซ็นต์ ) การย่อยสลายรุนแรงของพอลิเมอร์ถูก
ตรวจพบ น้ำหนักโมเลกุล ( MW ) ลดลงไปเกือบครึ่ง ( 2.8 105
ดา ) เมื่อเทียบกับพอลิเมอร์
สกัดโดยใช้คลอโรฟอร์ม ( 4.6 105
ดา ) นอกจากนี้ ก่อนการใช้โซเดียมคลอไรด์ พบเพิ่ม
ผาและการกู้คืนความบริสุทธิ์ให้ 97.7 เปอร์เซ็นต์โดยน้ำหนัก และ 97.5 ตามลำดับ นอกจากนี้ไม่ signi จึงไม่สามารถเปลี่ยนแปลง
ผาและการกู้คืนความบริสุทธิ์พบว่าเมื่อไลโอเซลล์หรือเซลล์เปียกใช้ เพิ่มเติม characteriza -
tions ของหายและทดลองใช้ GPC , DSC , TGA และเครื่องดึง
การแปล กรุณารอสักครู่..
