USB-to-Ethernet offers you USB to Ethernet Adaptor Drivers
Although USB to Ethernet adaptors are cheap and plentiful, Mac OS X drivers are not.
USB-to-Ethernet offers you USB to Ethernet Adaptor Drivers. There are two basic catagories of USB-To-Ethernet adaptors:
■ USB 1.1 devices that use a Pegasus driver.
■ USB 2.0 devices that use a AX8817x driver (or its successor, the AX88772).
Each disk image includes an installer for Panther or Tiger, and a "src" folder containing the corresponding xCode projects.
Installation
Download and mount the appropriate driver disk image listed above, run the corresponding installer for Panther or Tiger, and then restart your system as suggested. The Installer will ask you to authenticate so it can place the corresponding driver in "/System/Library/Extensions/" with the correct file permisions to load as a kernel extension.
Next, plug-in your Ethernet adaptor with a live Ethernet cable attached. When you open the Network Preferences panel, it should inform you that a new port has appeared and ask if you want to enable it. Enable the new port and apply your network settings. That's it.
Each driver is pre-configured to recognize a handfull of common devices. If your device does not appear to be recognized by the driver, you might have to add it to the Info.plist file, which is located inside the USBPegasusEthernet.kext or USBAx8817x.kext directory. You can use the System Profiler or USBProber tool to find the corresponding Product ID and Vendor ID.
To uninstall the driver, make sure any USB adaptors are disconnected, and then drag the corresponding driver in /System/Library/Extensions/ USBPegaususEthernet.kext or USBAx8817x.kext to the trash. You may need to authenticate that you have administrator privileges.
USB 1.1 Performance
The Pegasus chipset provides a USB 1.1 compatible implementation which could be a concern for some users. USB 1.1 runs at 1.5 Mbps (low speed) or 12 Mbps (full speed). For best performance, it's important to isolate any low speed devices on a separate bus. Mice and keyboards often run at low speed.
Using the Link Rate tool in IPNetMonitorX, I measured the link rate to another device on my LAN as 6 Mbps. The built-in Ethernet on my 12" PBG4 reported 44 Mpbs. When I measured the link rate to the next hop router through my cable modem, it reported 1 mbps. It didn't make any difference whether I used Ethernet built-in or the USB-To-Ethernet adaptor. Finally, I downloaded a 2.2 MB file to compare the throughput using the Monitor tool.
Both downloads took 5 seconds, but Ethernet built-in reached a peak rate of 589 KBps versus 579 kBps. Repeating the experiment several times produced similar results. Ethernet built-in might be 1-2% faster, but performance was clearly limited by the speed of my cable modem (Your Mileage May Vary).
USB 2.0 Performance
The AX8817x chip set provides a USB 2.0 compatible implementation which runs at up to 480 Mbps (high speed), so it should be possible to keep up with 100 Mbps fast ethernet as long as there are no other slower devices on the same bus. To test this I copied a 64.8 MB music file to my PBG4 laptop connected through a LinkSys USB200M Ethernet Adaptor (en3) and compared this to the same file transfer using Built-in Ethernet (en0).
Both transfers reached 10 MBps (80-90 Mbps) and took about 10 seconds. I repeated the test in the other direction.
While the USB-To-Ethernet adaptor was slightly slower, at 80 Mbps there was little noticeable difference. Files moved quickly from one system to another via 100 Mbps fast Ethernet. Copying the same file using AirPort wireless took 50-90 seconds.
Stability
While other USB-To-Ethernet drivers are reported to be buggy, I haven't encountered any stability problems to date. The adaptor turns off when the computer goes to sleep and comes back on when the computer awakes. It does not support "Wake On LAN" at this time.
Wrap Up
This USB-To-Ethernet Adaptor combination could be an attractive solution for a Mac Mini, or old iBook used as an Internet gateway or server. I'm particularly fond of using old laptops as servers since they are compact, quiet, use little energy, and include their own battery backup.
Read more: http://mac.softpedia.com/get/System-Utilities/USB-to-Ethernet.shtml#ixzz4HT31r53P
USB-Ethernet มี USB โปรแกรมควบคุมอะแดปเตอร์อีเทอร์เน็ตถึงแม้ว่า USB กับอะแดปเตอร์อีเทอร์เน็ตมีราคาถูก และอุดมสมบูรณ์ Mac OS X โปรแกรมควบคุมไม่ได้USB-Ethernet มี USB โปรแกรมควบคุมอะแดปเตอร์อีเทอร์เน็ต มีสองหมวดพื้นฐานของอะแดปเตอร์ USB Ethernet:■อุปกรณ์ USB 1.1 ที่ใช้โปรแกรมควบคุมเพกาซัส■อุปกรณ์ USB 2.0 ที่ใช้โปรแกรมควบคุม AX8817x (หรือทด AX88772 การ)แต่ละภาพดิสก์มีโปรแกรมติดตั้งสำหรับเสือดำ หรือเสือ และ "ใช้" โฟลเดอร์ที่ประกอบด้วยโครงการ xCode สอดคล้องกันการติดตั้งดาวน์โหลด และติดตั้งภาพดิสก์ไดรเวอร์ที่เหมาะสมที่ระบุไว้ข้างต้น รันโปรแกรมติดตั้งที่สอดคล้องกันสำหรับเสือดำหรือเสือ และเริ่มระบบของคุณเป็นแนะนำใหม่ โปรแกรมติดตั้งจะถามคุณรับรองความถูกต้องให้มันวางโปรแกรมควบคุมที่สอดคล้องกันใน "ระบบ/ไลบรารีส่วนขยาย /" กับ permisions ถูกโหลดเป็นเคอร์เนลส่วนขยายถัดไป ปลั๊กอินอะแดปเตอร์อีเทอร์เน็ตของคุณ ด้วยสายเคเบิลอีเธอร์เน็ตสดแนบ เมื่อคุณเปิดแผงการตั้งค่าเครือข่าย ควรแจ้งท่านว่าพอร์ตใหม่ได้ปรากฏตัว และถามว่า คุณต้องการเปิดใช้งาน เปิดใช้งานพอร์ตใหม่ และใช้การตั้งค่าเครือข่ายของคุณ ที่อยู่ควบคุมแต่ละที่กำหนดไว้ล่วงหน้าให้จดจำ handfull อุปกรณ์ทั่วไป ถ้าอุปกรณ์ของคุณไม่รู้จักโปรแกรมควบคุม คุณอาจต้องเพิ่มไปยังแฟ้ม Info.plist ซึ่งตั้งอยู่ภายในไดเรกทอรี USBPegasusEthernet.kext หรือ USBAx8817x.kext คุณสามารถใช้เป็นเครื่องมือ USBProber หรือตัวสร้างโปรไฟล์ระบบจะค้นหาหมายเลขผลิตภัณฑ์ที่สอดคล้องกันและรหัสผู้จัดจำหน่ายถอนการติดตั้งโปรแกรมควบคุม ตรวจสอบให้แน่ใจว่า อะแดปเตอร์ USB ใด ๆ ไม่ได้เชื่อมต่อ และโปรแกรมควบคุมที่สอดคล้องกันในระบบ/คลัง/ส่วน ขยาย/USBPegaususEthernet.kext หรือ USBAx8817x.kext ลากไปถังขยะ ต้องตรวจสอบว่า คุณมีสิทธิ์ของผู้ดูแลระบบUSB 1.1 ประสิทธิภาพชิปเซ็ตเพกาซัสให้การดำเนินการรองรับ USB 1.1 ซึ่งอาจจะเป็นปัญหาสำหรับผู้ใช้บางคน USB 1.1 วิ่งที่ 1.5 Mbps (ความเร็วต่ำ) หรือ 12 Mbps (ความเร็ว) เพื่อประสิทธิภาพสูงสุด มันเป็นสิ่งสำคัญเพื่อแยกอุปกรณ์ความเร็วต่ำบนรถบัสแยกต่างหาก เมาส์และคีย์บอร์ดมักจะรันที่ความเร็วต่ำผมใช้เครื่องมือเชื่อมโยงอัตราใน IPNetMonitorX วัดอัตราการเชื่อมโยงไปยังอุปกรณ์อื่นบน LAN ของฉันเป็น 6 Mbps อีเทอร์เน็ตในตัวบน PBG4 ของฉัน 12" รายงาน 44 Mpbs เมื่อฉันสามารถวัดอัตราการเชื่อมโยงไปยังเราเตอร์ hop ถัดไปผ่านเคเบิลโมเด็ม รายงาน 1 mbps มันไม่ได้ทำให้ความแตกต่างว่าใช้อะแด็ปเตอร์ USB-Ethernet หรืออีเทอร์เน็ตในตัว ในที่สุด ดาวน์โหลดไฟล์ 2.2 MB การเปรียบเทียบอัตราความเร็วโดยใช้เครื่องมือตรวจสอบดาวน์โหลดทั้งเอา 5 วินาที แต่อีเทอร์เน็ตในตัวถึงอัตราสูงสุดของ 589 KBps เทียบกับ 579 kBps ทำซ้ำการทดลองหลาย ๆ ครั้งผลิตผลที่คล้ายกัน อีเทอร์เน็ตในตัวอาจจะ 1-2% ได้เร็วขึ้น แต่ประสิทธิภาพชัดเจนถูกจำกัด โดยความเร็วของโมเด็มเคเบิล (ของคุณระยะทางอาจเปลี่ยนแปลง)USB 2.0 ประสิทธิภาพThe AX8817x chip set provides a USB 2.0 compatible implementation which runs at up to 480 Mbps (high speed), so it should be possible to keep up with 100 Mbps fast ethernet as long as there are no other slower devices on the same bus. To test this I copied a 64.8 MB music file to my PBG4 laptop connected through a LinkSys USB200M Ethernet Adaptor (en3) and compared this to the same file transfer using Built-in Ethernet (en0).Both transfers reached 10 MBps (80-90 Mbps) and took about 10 seconds. I repeated the test in the other direction.While the USB-To-Ethernet adaptor was slightly slower, at 80 Mbps there was little noticeable difference. Files moved quickly from one system to another via 100 Mbps fast Ethernet. Copying the same file using AirPort wireless took 50-90 seconds.StabilityWhile other USB-To-Ethernet drivers are reported to be buggy, I haven't encountered any stability problems to date. The adaptor turns off when the computer goes to sleep and comes back on when the computer awakes. It does not support "Wake On LAN" at this time.Wrap UpThis USB-To-Ethernet Adaptor combination could be an attractive solution for a Mac Mini, or old iBook used as an Internet gateway or server. I'm particularly fond of using old laptops as servers since they are compact, quiet, use little energy, and include their own battery backup.Read more: http://mac.softpedia.com/get/System-Utilities/USB-to-Ethernet.shtml#ixzz4HT31r53P
การแปล กรุณารอสักครู่..
