2.4. Measurements
The bin was covered by a water-resistant cloth and moved under the
rainfall needles, the cloth was removed at the same time as the stopwatch
started. Once uninterrupted runoff was observed, the time was
noted and recorded as the time to runoff initiation. A 1000 mL graduated
cylinder was used to measure runoff volume. The turbid water was
oven-dried and weighed to determine the sediment yield.
A hydra probe soil sensor (Stevens Water Monitoring System, Inc.,
Portland, Oregon, USA) and a CS830 Neutron Probe (Nanjing ChiShun
Technology Development Co., Ltd., Nanjing, China) were used to determine
the soil water content at every 10 cm. The neutron probe was calibrated
twice in 2011 and 2012 against field volumetric soil water
contents determined by the oven drying method. Soil water content
was determined at 21 points (3 locations in the box × 7 soil depths)
(Fig. 1B), and was measured right before and after each rainfall event.
The soil water storage increase (SWI) after rainfall event was calculated
as follows:
2.4 . การวัด
bin ถูกปกคลุมด้วยผ้า นาฬิกา และย้ายสังกัด
ฝนเข็ม ผ้าจะถูกลบออกในเวลาเดียวกันเป็นนาฬิกาจับเวลา
เริ่ม เมื่อน้ำไหลบ่าอย่างต่อเนื่องพบว่า เวลาที่ถูกสังเกตและบันทึก
เป็นเวลาที่จะเริ่มต้นน้ำท่า 1000 มิลลิลิตรจบ
กระบอกถูกใช้ในการวัดปริมาณน้ำท่า น้ำที่ขุ่นเป็น
เตาอบแห้งและชั่งน้ำหนักเพื่อตรวจสอบตะกอน .
เป็นไฮดราหัวเซนเซอร์ ( สตีเว่น น้ำดิน ระบบการตรวจสอบ , Inc . ,
Portland , Oregon , USA ) และ cs830 นิวตรอนโพรบ ( จิง chishun
เทคโนโลยีพัฒนา Co . , Ltd หนานจิง , จีน ) ถูกใช้เพื่อตรวจสอบปริมาณน้ำในดิน
ทุกๆ 10 เซนติเมตร นิวตรอนโพรบก็สอบเทียบ
สองครั้งในปี 2011 และ 2012 กับสนามปริมาตรน้ำในดิน
เนื้อหาที่กำหนดโดยวิธีอบแห้ง ปริมาณน้ำในดินที่กำหนด
21 คะแนน ( 3 สถานที่ในกล่อง× 7 ความลึกดิน )
( รูปที่ 1A ) และทำการวัดก่อนและหลังแต่ละเหตุการณ์ฝน .
ดินน้ำกระเป๋าเพิ่ม ( swi ) หลังจากเหตุการณ์ฝนคำนวณ
ดังนี้
การแปล กรุณารอสักครู่..
