Quality Gate inspection criteria’s

Quality Gate inspection criteria’s assembly shop
The inspection plan “assembly” is prepared based on the production plan, according to the basic
requirements of Quality Concept Q/KS for assembly. The inspection list contains all defined
inspection contents, place of inspection (QG or Q- Station) and inspection time as well as the
capacity.
Depending on actual quality situation and/or feedback of other sensors, e.g. CS3/CS4 additional
inspection activities are necessary to be described in the dynamic inspection content.
The planning, coordination and performing of the Control System 2 inspection list is under
responsibility of QA - Engineering in consideration with production plan. The QA - Engineering will act
in close cooperation with production line management and QM & Engineering MBC.
The detailed tool list will be available in CGIS
General Scopes of inspection are fixed as following in the CS 2 checklist which is included in the
Audit Office based on the damage code.

ผลลัพธ์ (ไทย) 1:

Check the quality conditions of the access door assembly inspection plan "comprising" will be reserved for the production planning. According to the basic requirements of quality concepts Q / KS for equipment assembly. consists of inspecting all scheduled inspections content. Place of inspection (QG or Q- station) as well as time and monitoring capacity, depending on the actual situation and / or criticism of other sensors, such as CS3 / CS4 additional monitoring activities need to be explained. The content in dynamic monitoring plan. Coordinate and monitor the implementation of control systems, two items are under the responsibility of QA - in the planning, engineering, manufacturing QA - engineering is done with the producers of MBC's management and QM Engineering Tools are. CGIs still below the CS 2 checklist in the general scope of the audit, the Audit Office on corruption code.

ผลลัพธ์ (ไทย) 2:

Quality criteria to determine the general store door monitoring plan "Council".

Is prepared based on the production plan based on the needs of quality concepts Q / KS for assembly. All items are defined content inspection to verify the check (QG or Q -Station).

As well as time and monitoring capabilities.
Depending on the actual quality and / or suggestions of other sensors, such as CS3 / CS4
additional monitoring activities is necessary to have. been described in the content, dynamic monitoring.
Planning, coordination and implementation of control systems. 2
checklist, which is under the responsibility of QA. - Engineering in the production plan with QA. -
Engineering will act in close cooperation with the management of production lines and quality management and engineering. MBC.
Catalogue details are available. CGIs
general scope of the audit have been corrected following the CS 2
examination, which is included in the Audit Office based on the code of damage.

ผลลัพธ์ (ไทย) 3:

The Doors of the quality
Monitoring Plan "comprising" is prepared by the Plan Needs Basic
quality Concepts KS Q / for Assembly. The Checklist is all SET to
Check the contents. Place of Inspection (QG or Q - Station) and time Monitoring as well. as capacity.

Based on the quality and / or opinions of other sensors, such as CS3 / CS4 additional monitoring activities
are needed are described in the content. The dynamic monitoring.
Planning, coordination and implementation of control systems at two check list under the responsibility of QA -
engineering in the production plan QA - engineering is done.
ในความร่วมมืออย่างใกล้ชิดกับการจัดการการผลิต QM &วิศวกรรม MBC .
รายการเครื่องมือที่ละเอียดจะสามารถใช้ได้ในภาษา CGiSLanguage
ทั่วไป ขอบเขตของการตรวจสอบการแก้ไขดังต่อไปนี้ใน CS 2 รายการซึ่งรวมอยู่ในสำนักงานตรวจสอบบัญชีตาม

ความเสียหายรหัส