Scrap Yard knives feature the strongest tang design possible. It is nearly the full length of the handle and comes within 1/4" of the butt of the handle (see photo). When designing the tang for these blades we had considered having it protrude through the end of the handle, but our testing proved that this feature, when used as designed, for hammering, allowed dirt, debris, and excessive moisture to gather under the handle. This in turn leads to a much greater possibility for handle and/or tang failure. At Scrap Yard Knife Co. we don't take chances when it comes to long term durability and performance.
You'll also note the radiused curves leading to the tang from the blade (see photo). Not only do these eliminate the possibility of stress fractures and microscopic fissures that can cause catastrophic failure in the field but the large lower radius ensures that the handles will not rotate on the tang like many competitors' handles will when used in hot climates.
Noting that our knives are designed to be used in the most extreme conditions, we must anticipate the worst possible scenarios possible. With this in mind, we designed our handle tangs to be used effectively even if the handles are removed. Of course this is an almost impossible scenario as it would most likely require burning the handle off, but it is better to be prepared than not.