The experiments were performed using a ZEEnit 600 atomic
absorption spectrometer (Analytik Jena AG, Jena, Germany)
equipped with a graphite atomizer with transverse heating and
Zeeman effect background correction. A MPE 60 automatic liquid
autosampler (Analytik Jena AG, Jena, Germany) was used to introduce
the samples. In all analyzes, pyrolytic graphite-coated tubes
and a L’vov platform were employed. A cadmium hollow cathode
lamp (Varian, Mulgrave, VA, Australia) with wavelength of
228.8 nm and a spectral bandwidth of 0.5 nm was used as the radiation
source. Argon (purity, 99.997%) at an internal flow rate of
2.0 L min1 was used as the purge gas during all steps (White
Martins, Salvador, Brazil) except atomization, during which the
flow was stopped. The protocol proposed in this work is presented
in Table 1.
ผลการทดลองใช้ zeenit 600 อะตอม
การดูดซึม Spectrometer ( ANALYTIK JENA AG , เยนา , เยอรมนี )
พร้อมกับฉีดกราไฟท์ที่มีความร้อนตามขวางและ
Zeeman ผลแก้ไขพื้นหลัง เป็น MPE 60 ของเหลวอัตโนมัติ
autosampler ( ANALYTIK JENA AG , เยนา , เยอรมนี ) ถูกใช้เพื่อแนะนำ
ตัวอย่าง ในวิเคราะห์ ไพโรไลติก กราไฟท์ เคลือบท่อ
และ l'vov แพลตฟอร์มงาน เป็นโลหะกลวงแคโทด
โคมไฟ ( Varian Mulgrave , ออสเตรเลีย , VA , ) ที่มีความยาวคลื่น
228.8 nm และแบนด์วิดธ์ของสเปกตรัมของ 0.5 nm จึงถูกใช้เป็นแหล่งรังสี
. อาร์กอน ( ความบริสุทธิ์ 99.997 % ) ในอัตราการไหลภายในท่อของ
2.0 ลิตรนาที 1 ใช้เป็นกำจัดก๊าซในระหว่างขั้นตอนทั้งหมด ( สีขาว
มาร์ติน , ซัลวาดอร์ , บราซิล ) ยกเว้น atomization ในระหว่างที่
ไหลก็หยุดโพรโทคอลที่เสนอในงานวิจัยนี้เสนอ
ในตารางที่ 1
การแปล กรุณารอสักครู่..