A schematic illustration and photographic representation of the
test set-up are shown in Fig. 1. The system basically includes two
closed flow loops (hot water and cold water loops) and a test section.
Hot water loop (inner tube) consists of a water pumps, a
Rotameter, electrical heater, hot water tank, fan, control valves, and
a dimmer (to control the power of electrical heater). Cold water
loop (annulus) consists of a water pump, a Rotameter and control
valves. The temperature of the cold water loop is controlled by a
cooling unit. The cooling unit consists of a compressor, condenser
(with R-12 refrigerant), evaporator and an expansion valve. Indeed,
the evaporator is inserted in the cold water tank. Besides, incline-U
tube manometer and digital thermometers were put into the flow
at the inlets and outlets of the test section to measure the bulk
temperatures and pressure drop of flow.
ภาพแผนผังและการแสดงภาพถ่ายของ
ทดสอบการตั้งค่าจะแสดงในรูปที่ 1 ระบบโดยทั่วไปประกอบด้วยสอง
ปิดลูปไหล ( น้ำร้อนและเย็นห่วงน้ำ ) และแบบทดสอบมาตรา .
ห่วงน้ำร้อน ( ยางใน ) ประกอบด้วยเครื่องสูบน้ำ ,
โรตามิเตอร์ไฟฟ้า , เครื่องทำน้ำอุ่น , น้ำร้อนถัง , พัดลม , วาล์วควบคุม , และการหรี่ ( เพื่อควบคุมการใช้พลังงานของเครื่องทำน้ำอุ่นไฟฟ้า )
น้ำเย็นห่วง ( วงแหวน ) ประกอบด้วยเครื่องสูบน้ำ , โรทามิเตอร์และการควบคุม
valves อุณหภูมิของน้ำที่เย็น ห่วงถูกควบคุมโดย
หน่วยทำความเย็น หน่วยทำความเย็นประกอบด้วยคอมเพรสเซอร์ คอนเดนเซอร์
( กับสารทำความเย็นระเหยองศาเซลเซียส ) และการ ขยายตัวของวาล์ว แน่นอน
ระเหยจะถูกแทรกลงในถังน้ำเย็น นอกจากนี้ incline-u
ท่อเครื่องวัดเครื่องวัดอุณหภูมิดิจิตอลและถูกใส่ลงในการไหล
ที่ inlets และร้านของส่วนการทดสอบการวัดอุณหภูมิและความดันที่ลดลงของกลุ่ม
ไหล
การแปล กรุณารอสักครู่..