Description
Solvent-based wax for the cleaning and maintenance of sealed, oiled and
unsealed wood and cork floors.
Key properties
Well balanced cleaner/maintainer based on hard waxes and solvents
Very effective on solvent based soiling
Buffable protective film
Benefits
Protects against humidity in the grouts (especially pre-varnished parquet) and
from premature wear
Scuff marks, tar, oil and grease can efficiently be removed when using a spray
method
• Provides an attractive glossy shine
Use instructions
Dosage:
The product is ready to use. Apply undiluted.
Application:
Full surface cleaning/maintenance
Initial treatment: For sealed wood add the product into the spray device of a
single disc machine, equipped with red pad, and spray clean the floor. For
unsealed wood apply one thin coat with a polish applicator. Allow to dry, then
immediately buff. Unsealed wood floors may require a second coat. Apply the
second coat only when first coat is completely dry. After the floor has dried,
buff the entire area with a white or red pad to densify the film.
Spray cleaning: Add the product into the spray device of a single disc machine,
equipped with an appropriate pad, and spray clean the floor. After a short drying
time, buff the whole surface for a more uniform appearance/gloss level.
Spot cleaning/maintenance
Add the product into the spray device of a single disc machine, equipped with
an appropriate pad, and spray clean the floor by spraying only on spots/soiled
areas. After a short drying time, buff the whole surface for a more uniform
appearance/gloss level.
Stripping
Spray clean the surface with CAREFREE Solve and a single disc machine, equipped
with a blue pad.
Important:
Shake well before use. Do not store or use a temperatures below 5° C. Bring
the product to room temperature (open container and set container in warm
water) before use. Do not use on solvent sensitive floors (e.g. rubber, asphalt,
asphalt tile). Cloths soiled with the product are inflammable.