ซีโอไลท์มีขนาดรูขุมขนเครื่องแบบและดังนั้นจึงไม่แสดงปรากฏการณ์นี้ ลีเมอร์มี
ช่วงการขยายขนาดของรูขุมขนและในบางประการที่คล้ายกับก๊อบปี้ แต่บางโพลิเมอร์
มีความคิดที่ขาดขนาดเล็กมากรูขุมขนขนาดเล็ก คาร์บอนยังมีการแสดงที่เกี่ยวกับเวลาการแพร่กระจายของ
VOC จากมหภาคเพื่อรูขุมขนรูขุมขนขนาดเล็ก ซีโอไลต์และโพลิเมอร์แสดงขึ้นอยู่กับเวลานี้
การแพร่กระจายในระดับที่เห็นได้ชัดเจนมากน้อย
Zeolite has a uniform pore size and therefore does not exhibit this phenomenon. Polymers have
an extended range of pore size, and in some respects are similar to carbons, but some polymers
are thought to lack the very small micro-pores. Carbon also displays a time-related spreading of
VOC from the macro-pores to the micro-pores. Zeolite and polymers show this time dependent
spreading to a much less noticeable degree.
The “working capacity” of the adsorbent is determined by the difference between the desorbed
conditioned level and the full adsorption isotherm of the adsorbent. Thus, the conditioning effect
must be considered when sizing the adsorbent bed. The conditioning effect can require up to
twice as much adsorbent in the bed. Since regeneration should occur only about every 8 or 16
operating hours, the capacity of the bed(s) can be determined by the concentration of VOC, the
air flow rate, the weight of adsorbent in the bed(s), the type of adsorbent, and the “working
capacity” of the adsorbent. In this way, the “working capacity” can have a significant effect on
the cost of installing, operating, and maintaining an adsorber.