Study on the production of fiber sheet of plywood from the remainder of the coconut the purpose is to study the possibility to apply a coir dust and coconut fiber bring the plywood sheet production with cold compaction process Size 300 × 300 mm thickness 10 mm using gypsum powder 450 g as a solder take the pieces of plywood production go to test the mechanical properties and physical properties the best flexural strength is 11.54 newtons per square millimeter which is lower than the standard JIS A 5905 accounted for 23.7 percent the moisture content was 3.86 percent of the weight before drying the best density was 0.80 grams per square centimeter the swelling when immersed in water for 2 hours and at 24 hours for the best value equal to 1.63 percent and 2.41 percent of its thickness before soaking veneer respectively water absorption values at time 2 hours, and the 24 hours clock, the best value is equal to 5.40 percent and 5.49 percent of weight plates, plywood prior to the respective dip by sheets of plywood from the remainder of the coconut can be used to decorate houses for beauty but it is not suitable for the task to the strength and resistant to bending strength.