All cabling for this unit is limited to less than 30m (98.4’). See wiring diagrams for
specific cable types required.
Power cabling is limited to less than 10m (32.8’) in total length from its source;
power is intended to be from a local bus structure. The control is NOT intended
to have a power bus that is derived from a plant-wide distribution system, remote
source, or similar “mains” type distribution systems. The power to the control
should also be a dedicated circuit, directly to the battery or source via a power
and return wire that are routed together.
See User Manual 36526 for additional regulatory information, limitations, and
wiring diagrams with specific, required cable types.
All cabling for this unit is limited to less than 30m (98.4’). See wiring diagrams forspecific cable types required.Power cabling is limited to less than 10m (32.8’) in total length from its source;power is intended to be from a local bus structure. The control is NOT intendedto have a power bus that is derived from a plant-wide distribution system, remotesource, or similar “mains” type distribution systems. The power to the controlshould also be a dedicated circuit, directly to the battery or source via a powerand return wire that are routed together.See User Manual 36526 for additional regulatory information, limitations, andwiring diagrams with specific, required cable types.
การแปล กรุณารอสักครู่..
