Solar red BA (SR-BA) and solar brittle blue A (SBB-A) direct dyes adsorption using Eucalyptus
angophoroides bark (EAB) biomass was studied. The effect of process variables i.e., pH, contact time,
particle size, temperature, initial dyes concentration, adsorbent dose and NaCl addition were
investigated. The adsorption isotherms (Langmuir, Freundlich and Temkin), kinetics models (pseudofirst
and pseudo-second-order) and thermodynamics parameters (DH, DS and DG) were employed to
evaluate the adsorption mechanism. Thermodynamic studies indicated the spontaneous and exothermic
adsorption process of both dyes onto EAB. Maximum adsorptions of SBB-A and RR-BA onto EAB were
49 mg/g and (43.5 mg/g), respectively at 2 pH, 0.25 mm particle size, 303 K, 0.1 g adsorbent dose, 0.05 M
NaCl, 25 mg/L dyes initial concentration and contact time 180 min (SBB-A) and 240 min (RR-BA). The SEM
and FTIR studies of dye loaded and unloaded biomass were performed in order to check the surface
morphology and functional group involved in dye adsorption. The optimized conditions were applied for
the adsorption of dyes from textile wastewater and up to 65.4%
3.20 dye removal was achieved. Results
indicated that the EAB could be an efficient and low cost adsorbent for the adsorption of dyes form textile
effluents.
พลังงานแสงอาทิตย์สีแดง BA ( sr-ba ) และพลังงานแสงอาทิตย์ เปราะสีฟ้า ( sbb-a ) การดูดซับสีย้อมโดยตรงใช้ยูคาลิปตัสangophoroides เปลือกไม้ ( eab ) มวลชีวภาพที่ศึกษา ผลของกระบวนการตัวแปรคือ ค่าพีเอช เวลาสัมผัสขนาดอนุภาค , อุณหภูมิ , ความเข้มข้นเริ่มต้นของสีย้อม ปริมาณตัวดูดซับ และเพิ่มเกลือคือสอบสวน การดูดซับไอโซเทอร์ม ( Langmuir ช์ , และ แบบจำลองจลนศาสตร์ ( pseudofirst เทมคิ้น )เทียม และอันดับสอง ) และพารามิเตอร์ทางอุณหพลศาสตร์ ( DS DH และ DG ) ถูกใช้ศึกษากลไกการดูดซับ การศึกษาพบว่าทางธรรมชาติและคายความร้อนการดูดซับของทั้งสองสี ลงบน eab . สูงสุดของ sbb-a rr-ba ลงทดสอบและ eab คือ49 มิลลิกรัมต่อลิตร ( mg / 43.5 g ) ตามลำดับที่ pH , 0.25 มม. ขนาด 303 k , 0.1 กรัมตัวดูดซับปริมาณ 0.05 เมตรเกลือ , และ 25 มิลลิกรัม / ลิตร ความเข้มข้นเริ่มต้น และสีย้อมติดต่อเวลา 180 นาที ( sbb-a ) และ 240 นาที ( rr-ba ) โดย SEMการศึกษาการย้อมและ FTIR และชีวมวล โหลดได้โหลด เพื่อตรวจสอบพื้นผิวโครงสร้างและการทำงานของกลุ่มที่เกี่ยวข้องในการดูดซับสีย้อม . โดยภาวะที่เหมาะสมสำหรับการดูดซับสีย้อมจากน้ำเสียโรงงานฟอกย้อมสิ่งทอและได้ถึง 400 %3.20 กำจัดสีย้อมได้บรรลุแล้ว ผลลัพธ์พบว่าสามารถดูดซับ eab ที่มีประสิทธิภาพและค่าใช้จ่ายต่ำสำหรับการดูดซับสีย้อมรูปแบบสิ่งทอน้ำทิ้ง .
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)