2.2. Twisted films
An artificially twisted PPW film was prepared by using a kitchen
mixer at a revolving speed of 15,000–18,000 rpm under dry condition
(Hamilton Beach, HBB908). During the period of study, twists
were apparently formed only in CP films rather than PP and PE
films. The visuals of twisted and non-twisted PVDC films were presented
in Fig. 2. Elasticity is generally expressed as the ability of
the material to return to its original shape. Plasticized PVC and
PVDC with chlorine group in their structure are known to have
low elasticity and high tensile strength, while the elasticity of
other plastic films is high but tensile strengths is very low (APC,
1996). The difference of elasticity and tensile strength between
chlorinated plastics and other plastics will cause selective twist
formation for CP films (APC, 1996). The experiments were carried
out at different strengths and at different revolving speeds to
determine the effect of twisted area on floatation. The twisted area
was classified by visual observation.
2.2 ภาพยนตร์บิด
บิดเทียมภาพยนตร์ PPW ถูกจัดทำขึ้นโดยใช้ห้องครัว
ผสมที่ความเร็วของการหมุนรอบต่อนาที 15,000-18,000 ภายใต้เงื่อนไขแห้ง
(แฮมิลตันบีช, HBB908) ในช่วงระยะเวลาของการศึกษา, บิด
กำลังก่อตัวขึ้นเห็นได้ชัดเพียงในภาพยนตร์ซีพีมากกว่า PE PP และ
ภาพยนตร์ ภาพของภาพยนตร์ PVDC บิดและไม่บิดถูกนำเสนอ
ในรูป 2. ความยืดหยุ่นจะแสดงโดยทั่วไปว่าเป็นความสามารถของ
วัสดุที่จะกลับไปแบบเดิม พลาสติกพีวีซีและ
PVDC กับกลุ่มคลอรีนในโครงสร้างของพวกเขาเป็นที่รู้จักกันที่จะมี
ความยืดหยุ่นต่ำและความต้านทานแรงดึงสูงในขณะที่ความยืดหยุ่นของ
ฟิล์มพลาสติกอื่น ๆ ที่อยู่ในระดับสูง แต่แรงดึงจุดแข็งอยู่ในระดับต่ำมาก (APC,
1996) ความแตกต่างของความยืดหยุ่นและความต้านทานแรงดึงระหว่าง
คลอรีนและพลาสติกพลาสติกอื่น ๆ ที่จะทำให้เกิดการบิดเลือก
รูปแบบสำหรับภาพยนตร์ซีพี (APC, 1996) ทดลอง
ออกที่จุดแข็งที่แตกต่างกันและหมุนด้วยความเร็วที่แตกต่างเพื่อ
ตรวจสอบผลกระทบของพื้นที่บิดบนลอยตัว พื้นที่บิด
ถูกจัดโดยการสังเกตภาพ
การแปล กรุณารอสักครู่..