The purpose of these experiments was to determine the contact time required to reach the equilibrium between
dissolved and solid-bound sorbate. Equilibrium time is a function of many factors, such as type of biomass (number and
kind of biosorption sites), size and form of biomass, physiological state of biomass (active or inactive, free or
immobilized), as well as the metal involved in the biosorption system. Reported values for equilibrium time are in the
range from 15 minutes (Aksu et al., 1991).
Figure 5 presents the results at two different initial concentrations of 92 and 162 mg/l of copper with a contact time of 3
hours was enough for the system to reach equilibrium. So, this time was used to obtain the isotherms in all experiments.
Figure 5 clearly indicates that sorption can be divided into two stages: one in which the sorption rate is very high (60%
of biomass saturation capacity in a contact time of 25 minutes), followed by a second stage with a much lower sorption
rate. This behaviour has often been reported by other researches (Crist et al., 1994), the proton uptake by algal cells
consists of two processes, a fast surface reaction and a slow diffusion of protons into the cells. The fast biosorption
kinetics observed is typical for biosorption of metals involving no energy-mediated reactions, where metal removal
from solution is due to purely physico-chemical interactions between biomass and metal solution (Aksu and Kutsal,
2001).
วัตถุประสงค์ของการทดลองเหล่านี้คือการ กำหนดเวลาผู้ติดต่อต้องใช้ถึงสมดุลระหว่างsorbate ละลาย และของแข็งที่ถูกผูกไว้ เวลาสมดุลคือ ฟังก์ชันของปัจจัยหลายอย่าง เช่นชนิดของชีวมวล (หมายเลข และชนิดของเว็บไซต์ biosorption), ขนาดและรูปแบบของชีวมวล สภาวะสรีรวิทยาของชีวมวล (ใช้ หรือไม่ใช้งาน อิสระ หรือหา), และโลหะเกี่ยวข้องในระบบ biosorption ค่ารายงานเวลาสมดุลอยู่ในตัวช่วง 15 นาที (อัคสุ et al., 1991)รูปที่ 5 แสดงผลที่สองแตกต่างกันเริ่มต้นความเข้มข้นของ 92 และ 162 mg/l ของทองแดง ด้วยเวลาติดต่อ 3ชั่วโมงก็เพียงพอสำหรับระบบถึงสมดุล ดังนั้น เวลานี้ถูกใช้เพื่อขอรับ isotherms ในการทดลองทั้งหมดรูปที่ 5 ชัดเจนบ่งชี้ว่า ดูดสามารถแบ่งตามขั้นตอนที่สอง: หนึ่งที่อัตราการดูดจะสูงมาก (60%ชีวมวลเข้มกำลังในเวลา 25 นาทีติดต่อ), ตาม ด้วยขั้นตอนที่สองกับการดูดต่ำกว่ามากอัตรา รายงานพฤติกรรมนี้ โดยอื่น ๆ งานวิจัย (Crist et al., 1994), ดูดซับ โดยเซลล์ algal โปรตอนมักประกอบด้วยกระบวนการสอง ปฏิกิริยาผิวอย่างรวดเร็ว และแพร่ช้าของโปรตอนเข้าไปในเซลล์ Biosorption รวดเร็วจลนพลศาสตร์สังเกตทั่วไปสำหรับ biosorption ของโลหะที่เกี่ยวข้องกับปฏิกิริยาไม่ mediated พลังงาน โลหะที่เอาจากโซลูชันได้เนื่องจากดิออร์เพียงอย่างเดียวการโต้ตอบระหว่างชีวมวลและโซลูชั่นโลหะ (อัคสุและ Kutsal2001).
การแปล กรุณารอสักครู่..
