The tow line battery, perform the following steps
1. Turn off the key and อุปกรณ์ไฟฟ้าทั้งหมด of the car battery, no fire.
2.Use the red line extension cord positive () the head line with the anode () of the battery, no power line. ที่เหลือต่อ with anode () of the battery with the fire.
3.Use extension cord (or black) down the green (-) the head of networks with cathode (-) of the battery with the fire head remaining lines connected to the metal parts of the engine. Car battery or chassis with low power away from the battery most
4.Start engine battery fire then speed up slightly
5. Engine cars battery fire. If motors star also. Slowly rotate, check the extension cord that clamp tight? Then accelerate, about 2000 rpm, until sure engine out, so let cars strainer
6. When the engine 6.1 take สายลบ
(-) by removing the line out of the body. Battery less
6.2 take down the remaining from the cathode of the battery and good fire
6.3 disconnect the positive () by removing the head line from the anode () of the battery well
6.4 off line (), the rest from the anode () car battery. Respectively
7. Cover and a cavity filled for all channels. The cloth used to dump
.I repeat that you should follow the procedures and 7 number respectively.
when the car start on should take your car to check the service center to check status, or change the battery next