PLA films with no additives exhibited a Tg of approximately
50 C and a Tc of approximately 93 C. Two melting temperatures
were observed at values of approximately 140 C and 150 C, which
correspond to the GSPLA additive and PLA, respectively. The addition
of Proallium® to the PLA films decreased the Tg, Tc and Tm. In
this sense, the addition of Proallium® at nominal contents of 2%
provoked a lower modification of the thermal properties (around
10 C, 5 C, 5 C and 1.5 C less than PLA with no additives for Tg, Tc,
Tm1 and Tm2, respectively) than the addition of contents above 5%
which provoked a significant decrease (p < 0.05) in the Tg, Tc and
Tm (around 30 C, 25 C, 23 C and 10 C less than PLA with no additives for Tg, Tc, Tm1 and Tm2, respectively). In addition
ภาพยนตร์สารไม่ปลาจัดแสดง Tg ของประมาณ50 C และ Tc ของประมาณ 93 c อุณหภูมิการละลายสองได้สังเกตที่ค่าประมาณ 140 C และ 150 C ซึ่งสอดคล้องกับการบวก GSPLA และปลา ตามลำดับ การเพิ่มProallium ®เพื่อปลาฟิล์มลด Tg, Tc กับ Tm ในความรู้สึกนี้ การเพิ่ม Proallium ®ที่ระบุเนื้อหาของ 2%การปรับเปลี่ยนคุณสมบัติร้อน (รอบต่ำกว่าท่าน10 C, 5 C ซี 5 และ 1.5 C น้อยกว่าปลา มีสารไม่สำหรับ Tg, TcTm1 และ Tm2 ตามลำดับ) มากกว่าการเพิ่มเนื้อหาข้างต้น 5%ซึ่งท่านลดลงอย่างมีนัยสำคัญ (p < 0.05) ใน Tg, Tc และTm (ประมาณ 30 C, 25 C, 23 C และ 10 C น้อยกว่าปลา มีสารไม่ Tg, Tc, Tm1 และ Tm2 ตามลำดับ) นอกจากนี้
การแปล กรุณารอสักครู่..
