Compact Digital Indicators Enables direct reading for physical value
Applicable Bridge Resistance 60 to 1000Ω
Bridge Excitation 1V(constant voltage)
Measuring Range ±5mV/V(±10000μm/m),
including zero adjustment range
Digital Zero Compensation Possible in the measuring range
Calibration Modes Sensitivity registration calibration Actual load calibration
TEDS the WDS-180A enables calibration by reading TEDS
TEDS information or by reading TEDS and registered profile data.
Indication -9999 to 9999 (minus is indicated by flickering the center segment of thousands' place digit.)
Sampling Rate Approx.3 times per second
Nonlinearity ±0.05%FS
Strain mode Switchable between μm/m and mV/V
measure mode Proper engineering unit through multiplication by calibration coefficient
Minimum Scale Value Switchable to 1,2 or 5(in measure mode)
Peak Hold Holds a maximum value during measurement.
Auto Power OFF Can be set in a range of 1 to 99 minutes or none.
Low Battery Indication All digits of LED indicator flicker(battery voltage 2.3 to 1.9V).
Operating Temperature/Humidity Range - 5 to 40°C, 20 to 85%RH(non-condensing)
Power Supply AA size dry cell×2
Continuous Operation 24 hours or longer (with manganese dry cells)
Dimensions 66.5(W)×92.0(H)×28.0(D)mm (excluding protrusions)
Weight Approx. 180g(with manganese dry cells built in)