Clean Air Source
Some customers need to bring in clean outside air rather than drawing dusty plant air through the filters.
When doing this we recommend that air be brought into the machine from the bottom or through the filter
openings located nearest the feeder. Ductwork should be tightly connected to the machine and run to a clean
air source with as few bends or turns as possible. Do not use duct work that is too small. Please see
specifications for duct and air requirements. The clean air source should have a pre-filter with an open area
not less than the area of the deck surface. After your Gravity Separator is installed and the motors are
correctly wired take the time to become familiar with the following operating instructions and the theory behind
gravity separation.
-