Activated bentonite (1 M H2SO4 in distilled water, isopropyl
alcohol and ethanol at 60 ºC for 1 h) could adsorb soap of 46.16,
50.93 and 51.48% (w/w), respectively as only 37 % (w/w) for
natural bentonite (see in fig. 1). The acid values of biodiesel that
treated with activated bentonite (1 M H2SO4 in distilled water,
isopropyl alcohol and ethanol at 60 ºC for 1 h) was 0.14, 0.21,
and 0.27 (mg KOH/g oil), respectively (see in fig. 2). Treated
bentonite using ethanol as solvent showed the highest soap
adsorption and acid value. Due to low dielectric constant of
ethanol increased the space between bentonite layer [5]. Then
proton could exchange with the interlayer cation, protonated on
Si-O group of the tetrahedral sheet and dissolve octahedral sheet
easily. Therefore, the optimize solvent on bentonite activation
should be ethanol
เปิดเบนโทไนต์ ( 1 M กรดซัลฟิวริกในน้ำกลั่น , isopropyl แอลกอฮอล์และเอทานอลที่ 60 º
c 1 H ) สามารถดูดซับสบู่ 46.16
, และ 51.48 50.93 เปอร์เซ็นต์ ( น้ำหนัก / น้ำหนัก ) ตามลำดับ เป็นแค่ 37 % ( w / w )
เบนโทไนต์ธรรมชาติ ( ดูในรูปที่ 1 ) ค่าของกรดไบโอดีเซลที่
ถือว่าใช้เบนโทไนต์ ( 1 M กรดซัลฟิวริกในน้ำกลั่น ,
isopropyl แอลกอฮอล์และเอทานอลที่ 60 องศาเซลเซียส เป็นเวลา 1 ชั่วโมง º ) 0.14 , 0.21 ,
0 .27 ( มิลลิกรัม / กรัมน้ำมันเกาะ ) ตามลำดับ ( ดูในรูปที่ 2 ) การใช้แอลกอฮอล์เป็นตัวทำละลาย พบว่าเบน
ค่าการดูดซับสูงสุดและสบู่กรด เนื่องจากค่าไดอิเล็กทริกของเอทานอลที่เพิ่มขึ้นต่ำ
ช่องว่างระหว่างเบนโทไนต์ชั้น [ 5 ] งั้น
โปรตอนสามารถแลกเปลี่ยนกับการ protonated บนชั้น ,
พันธะ Si-O กลุ่มแผ่น tetrahedral และละลายแปดด้านแผ่น
ได้อย่างง่ายดาย ดังนั้นเพิ่มประสิทธิภาพในการกระตุ้นสารตัวทำละลาย
ควรเป็นเอทานอล
การแปล กรุณารอสักครู่..
