Experimental methods
The load acting on the tractor during field operation depends on
many factors such as soil condition and driver skill. Because taking
all of these factors into consideration was not practical (Nahmgung,
2001), effects of these factors were minimized in the study to
focus on effects of ground speed and PTO rotational speed on the
load through gear selection.
Rotary tillage was conducted at three ground speeds and three
PTO rotational speeds in upland field sites located at 358590
2300 and
358590
2600 North and 1278120
5600 and 1278130
300 East. The soil type
was sandy, the average water content was 22.3%, and the average
cone index was 1236 kPa, over the depths of 0–250 mm.
The tillage depth was set as 20 cm. The transmission gear was
set to at L1, L2, and L3 gears to match with PTO gears of P1, P2, and
P3, respectively. The gear settings were selected based on the
results of a survey for the annual usage ratio of tractor reported by
Kim et al. (2011a). The ground speeds of the tractor at L1, L2, and L3
were 1.87 km h1
, 2.64 km h1
, and 3.77 km h1 and the PTO
rotational speeds at P1, P2, and P3 were 540 rpm, 750 rpm, and
1000 rpm, respectively. The rotary tillage tool was a heavy duty
rotavator (WJ220E, WOONGJIN, Korea), and the required rated
power, total mass, tillage width, and dimensions were 75 kW,
750 kg, 2220 mm, and 1050 mm 2390 mm 1380 mm
(length width height), respectively.
2.3.
Experimental methodsThe load acting on the tractor during field operation depends onmany factors such as soil condition and driver skill. Because takingall of these factors into consideration was not practical (Nahmgung,2001), effects of these factors were minimized in the study tofocus on effects of ground speed and PTO rotational speed on theload through gear selection.Rotary tillage was conducted at three ground speeds and threePTO rotational speeds in upland field sites located at 3585902300 and3585902600 North and 12781205600 and 1278130300 East. The soil typewas sandy, the average water content was 22.3%, and the averagecone index was 1236 kPa, over the depths of 0–250 mm.The tillage depth was set as 20 cm. The transmission gear wasset to at L1, L2, and L3 gears to match with PTO gears of P1, P2, andP3, respectively. The gear settings were selected based on theresults of a survey for the annual usage ratio of tractor reported byKim et al. (2011a). The ground speeds of the tractor at L1, L2, and L3were 1.87 km h1, 2.64 km h1, and 3.77 km h1 and the PTOrotational speeds at P1, P2, and P3 were 540 rpm, 750 rpm, and1000 rpm, respectively. The rotary tillage tool was a heavy dutyrotavator (WJ220E, WOONGJIN, Korea), and the required ratedpower, total mass, tillage width, and dimensions were 75 kW,750 kg, 2220 mm, and 1050 mm 2390 mm 1380 mm(length width height), respectively.2.3.
การแปล กรุณารอสักครู่..
วิธีการทดลอง
โหลดการแสดงบนรถแทรกเตอร์ระหว่างการดำเนินการด้านการขึ้นอยู่กับ
ปัจจัยหลายอย่างเช่นสภาพดินและทักษะคนขับ เพราะการ
ทั้งหมดของปัจจัยเหล่านี้เข้าสู่การพิจารณาไม่ได้ในทางปฏิบัติ (Nahmgung,
2001) ผลกระทบของปัจจัยเหล่านี้ได้รับการลดลงในการศึกษาจะ
มุ่งเน้นไปที่ผลกระทบของความเร็วในการส่งกำลังภาคพื้นดินและความเร็วในการหมุนใน
การโหลดผ่านการคัดเลือกเกียร์.
ดินแบบโรตารีได้รับการดำเนินการที่สาม ความเร็วภาคพื้นดินและสาม
PTO ความเร็วในการหมุนในเว็บไซต์ไร่ตั้งอยู่ที่ 358,590
และ 2300
358590
2600 เหนือและ 1278120
5600 และ 1,278,130
300 ตะวันออก ชนิดของดิน
เป็นทรายปริมาณน้ำเฉลี่ยอยู่ที่ 22.3% และค่าเฉลี่ยของ
ดัชนีกรวยเป็น 1,236 กิโลปาสคาลในช่วงความลึกของ 0-250 มม.
ความลึกของดินแบบที่ได้รับการกำหนดให้เป็น 20 ซม. เกียร์ที่ได้รับการ
ตั้งค่าให้ที่ L1, L2, L3 และเกียร์ให้เหมาะสมกับเกียร์ส่งกำลังออกของ P1, P2 และ
P3 ตามลำดับ การตั้งค่าเกียร์ได้รับการคัดเลือกขึ้นอยู่กับ
ผลการสำรวจการเปลี่ยนแปลงอัตราการใช้งานประจำปีของรถแทรกเตอร์รายงานโดย
คิม et al, (2011a) พื้นดินด้วยความเร็วของรถแทรกเตอร์ที่ L1, L2, L3 และ
เป็น 1.87 กม. h1
, 2.64 กม. h1
และ 3.77 กม. h1 และส่งกำลัง
หมุนด้วยความเร็วที่ P1, P2 และ P3 เป็น 540 รอบต่อนาที 750 รอบต่อนาทีและ
1000 รอบต่อนาทีตามลำดับ . เครื่องมือดินแบบหมุนเป็นหนัก
Rotavator (WJ220E, Woongjin เกาหลี) และจัดอันดับที่จำเป็นใน
การใช้พลังงานมวลรวมความกว้างดินแบบและขนาด 75 กิโลวัตต์
750 กิโลกรัม 2,220 มิลลิเมตรและ 1,050 มมมม 2,390 1,380 มิลลิเมตร
(ความยาว ความสูงความกว้าง) ตามลำดับ.
2.3
การแปล กรุณารอสักครู่..
วิธีการทดลอง
โหลดการแสดงบนรถแทรกเตอร์ในระหว่างการดำเนินการด้านขึ้นอยู่กับ
ปัจจัยหลายอย่าง เช่น สภาพดิน และฝีมือคนขับ เพราะถ่าย
ปัจจัยเหล่านี้ทั้งหมดเข้าสู่การพิจารณาไม่ได้ในทางปฏิบัติ ( nahmgung
, 2001 ) อิทธิพลของปัจจัยเหล่านี้ถูกลดลงในการศึกษา
เน้นผลของพื้นดินและความเร็ว PTO ความเร็วรอบใน
โหลด ผ่านการเลือกเกียร์โรตารี่ไถพรวนดินและดำเนินการที่ 3 ความเร็ว 3
PTO ความเร็วในการหมุนในเขตที่ดอนเว็บไซต์ตั้งอยู่ที่ 358590 2300 และ
358590 600 เหนือและ 1278120 5600 1278130
และ 300 East ดินประเภท
คือแซนดี้ ปริมาณน้ำเฉลี่ย 22.3 % และดัชนีเฉลี่ย
เป็นกรวยพวก KPA , ระดับความลึก 0 - 250 มม.
การไถพรวนลึกตั้งเป็น 20 cm การส่งผ่านเกียร์คือ
ตั้งที่ L1 ,L2 และ L3 เกียร์ ราคาเกียร์ PTO ของ P1 , P2 และ P3
) การตั้งค่าเกียร์ถูกเลือกขึ้นอยู่กับผลของการสำรวจ
สำหรับปีการใช้อัตราส่วนของรถแทรกเตอร์ที่รายงานโดย
Kim et al . ( 2011a ) พื้นดินความเร็วของรถแทรกเตอร์ที่ L1 , L2 และ L3
( 1.87 กิโลเมตร H1
, 2.64 กิโลเมตร H1
, และ 3.77 กม. H1 และ PTO
ความเร็วในการหมุนที่ P1 , P2 และ P3 เป็น 540 รอบต่อนาที , 750 รอบต่อนาทีและ
1000 รอบต่อนาที ,ตามลำดับ เครื่องมือพรวนดินโรตารี่เป็นหน้าที่หนัก rotavator
( wj220e woongjin , เกาหลี ) และต้องจัดอันดับ
พลังมวลชน ความกว้างของแปลงรวม และมิติ คือ 75 กิโลวัตต์
750 กก. 2220 มม. และ 1050 มม. มม. มม.
0 ความเหมาะสม ( ความสูงความกว้างความยาว ) , ตามลำดับ .
2.3
การแปล กรุณารอสักครู่..