Alloy 2 shown in above figure is a hypereutectoid steel containing 1.0 percent carbon. In the austenite range, this alloy consists of a uniform f.c.c. solid solution with each grain containing 1.0 percent carbon dissolved interstitially. Upon slow cooling, nothing happens until the line CJ is crossed at point x3. This line is called upper-critical-temperature line on the hypereutectoid side and is labeled Acm. The Acm line shows the maximum amount of carbon that can be dissolved in austenite as a function of temperature. Above the Acm line, austenite is an unsaturated solid solution. At the Acm line, point x3, the austenite is saturated in carbon. As the temperature is decreased, the carbon content of the austenite, that is, the maximum amount of carbon that can be dissolved in austenite, moves down along the Acm line towards point J. Therefore, as the temperature decreases from x3 to x4, the excess carbon above the amount required to saturate austenite is precipitated as cementite primarily along the grain boundaries. Finally, the eutectoid line is reached at x4. This line is called the lower-critical-temperature line on the hypereutectoid side and is labeled A3,1. Just above the A3,1 line the microstructure consists largely of austenite, with the excess proeutectoid cementite as a network surrounding the austenite grains. Applying lever rule,
แม็กซ์ 2 แสดงในรูปข้างบนเป็นเหล็กไฮคาร์บอนที่มีร้อยละ 1.0 ในช่วง austenite, โลหะผสมนี้ประกอบด้วยสารละลายของแข็งชุด FCC ด้วยเม็ดที่มีส่วนผสมของคาร์บอนร้อยละ 1.0 แต่ละละลาย interstitially เมื่อเย็นช้าไม่มีอะไรเกิดขึ้นจนกว่าจะถึงเส้น CJ ข้ามที่ x3 จุด เส้นนี้เรียกว่าเส้นบนที่สำคัญอุณหภูมิในด้านไฮและจะมีป้าย Acm สาย Acm แสดงให้เห็นถึงจำนวนเงินสูงสุดของคาร์บอนที่สามารถละลายใน austenite เป็นหน้าที่ของอุณหภูมิ เหนือเส้น Acm, austenite เป็นสารละลายของแข็งอิ่มตัว ที่บรรทัด Acm, x3 จุด austenite จะอิ่มตัวคาร์บอน ขณะที่อุณหภูมิจะลดลงปริมาณคาร์บอนของ austenite, ที่อยู่, จำนวนเงินสูงสุดของคาร์บอนที่สามารถละลายใน austenite, เลื่อนลงตามแนว Acm ต่อจุดเจดังนั้นเมื่ออุณหภูมิลดลงจากการ x3 x4, คาร์บอนส่วนเกินสูงกว่าจำนวนเงินที่จำเป็นในการดำรงสถานะอยู่เปียกโชกตกตะกอนเป็นซีเมนหลักตามแนวรอยต่อเม็ด สุดท้ายสายยูเทคถึงที่ x4 เส้นนี้เรียกว่าเส้นล่างที่สำคัญอุณหภูมิในด้านไฮและจะมีป้าย A3,1 เพียงแค่เหนือเส้น A3,1 จุลภาคส่วนใหญ่ประกอบด้วย austenite กับซีเมน proeutectoid ส่วนเกินเป็นเครือข่ายโดยรอบเมล็ด austenite การประยุกต์ใช้กฎของคาน,
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)