The amount of absorbed
moisture at the storage time of 2 days in all of the starchbased
foams studied (i.e. 9.4G0.3% for pure starch foam
and 8.4G0.5 and 7.2G0.4% for starch/PLA foams having
the PLA content of 10 and 30 wt%, respectively) may be
just the optimal amount where the rigidity and the flexibility
of the starch molecules are balanced. For a given level of
relative humidity, the presence of PLA was responsible for
an appreciable increase in both the tensile and flexural strength of the hybrid foams in comparison with those of the
pure starch foams. Both percentage of elongation at break
and maximum flexural strain of the foam specimens were
found to initially increase with an increase in the storage
time (up to 2–4 days) and then became practically
unchanged with further increase in the storage time. The
findings were, again, in general congruence with the results
of starch/PVA and starch/PCL hybrid foams earlier reported
(Preechawong, Peesan, Rujiravanit, & Supaphol, 2004;
Preechawong, Peesan, Supaphol, & Rujiravanit, 2004).
The amount of absorbedmoisture at the storage time of 2 days in all of the starchbasedfoams studied (i.e. 9.4G0.3% for pure starch foamand 8.4G0.5 and 7.2G0.4% for starch/PLA foams havingthe PLA content of 10 and 30 wt%, respectively) may bejust the optimal amount where the rigidity and the flexibilityof the starch molecules are balanced. For a given level ofrelative humidity, the presence of PLA was responsible foran appreciable increase in both the tensile and flexural strength of the hybrid foams in comparison with those of thepure starch foams. Both percentage of elongation at breakand maximum flexural strain of the foam specimens werefound to initially increase with an increase in the storagetime (up to 2–4 days) and then became practicallyunchanged with further increase in the storage time. Thefindings were, again, in general congruence with the resultsof starch/PVA and starch/PCL hybrid foams earlier reported(Preechawong, Peesan, Rujiravanit, & Supaphol, 2004;Preechawong, Peesan, Supaphol, & Rujiravanit, 2004).
การแปล กรุณารอสักครู่..
ปริมาณการดูดซึมความชื้นที่กระเป๋า
เวลา 2 วันในทั้งหมดของ starchbased
โฟมเรียน ( เช่น 9.4g0.3 %
แป้งโฟมและบริสุทธิ์ และ 8.4g0.5 7.2g0.4 % / แป้งโฟมมีปลา
ปลาปริมาณ 10 และ 30 เปอร์เซ็นต์โดยน้ำหนัก ตามลำดับ ) อาจเป็นเพียงปริมาณที่เหมาะสม
ความแข็งแกร่ง และความยืดหยุ่น
ของโมเลกุลแป้งมีความสมดุล เพื่อให้ระดับของ
ความชื้นสัมพัทธ์การปรากฏตัวของปลาเป็นผู้รับผิดชอบ
เพิ่มชดช้อย ทั้งในด้านแรงดึงและแรงดัดของโฟมไฮบริดในการเปรียบเทียบกับบรรดา
โฟมแป้งบริสุทธิ์ ทั้งค่าร้อยละของการยืดตัวที่จุดแตกหัก
และสูงสุดดัดสายพันธุ์ของโฟมจำนวน
พบเริ่มต้นขึ้นด้วยการเพิ่มเวลาในการจัดเก็บ
( ถึง 2 – 4 วัน ) แล้วกลายเป็นจริง
ปรับเพิ่มในการเก็บ
สรุปอีกครั้งในความสอดคล้องกันทั่วไปกับผลลัพธ์
/ แป้ง / แป้งโฟมไฮบริด ( PVA และรายงานก่อนหน้านี้
( preechawong peesan rujiravanit , , , &จาริก , 2004 ;
preechawong peesan , ธัญญา , & rujiravanit , 2004 )
การแปล กรุณารอสักครู่..