2. Experimental program
2.1. Materials and mixture proportions
in this study, ordinary type 1 Portland cement (OPC, P.O 52.5), fly ash and silica fume were used as binders (Co., Ltd, China). The chemical compositions of the various binders are listed in Table 1. According to the suggestions of references ,coarse aggregates were not used in UHPC matrix, silica sand having a particle size in the range of 0.9–2.0 mm was used instead. Silica flour has a density of 2.626 g/cm3 and average particle size of 50.1 lm was also used. A polycarboxylate-based high-range water-reducing admixture (HRWRA) was used at a ratio of 0.15% by mass of cement. NS having 20 nm average particle size and NC sized in the range of 15–80 nm were incorporated at ratios of 0.5%, 1.0%, 1.5% and 2.0% for NS and 1.0%, 2.0%, 3.0% and 4.0% for NC as partial mass replacement for cement, respectively.
A TEM image of the used NS and an SEM image of the NC powders are shown
2. ทดลองโปรแกรม2.1. วัสดุและสัดส่วนของส่วนผสมในการศึกษานี้ ซีเมนต์ปอร์ตแลนด์ชนิดธรรมดา 1 (OPC, P.O 52.5), เถ้า และซิลิก้าโตนดถูกใช้เป็นยึดประสาน (Co., Ltd จีน) จนเคมีของยึดประสานต่าง ๆ แสดงในตารางที่ 1 ตามคำแนะนำการอ้างอิง ไม่ใช้วัตถุดิบเกรดหยาบในเมตริกซ์ UHPC ซิลิก้าทรายอนุภาคมีขนาดในช่วง 0.9-2.0 มม.ใช้แทน ซิลิก้ามีความหนาแน่น 2.626 g/cm3 และค่าเฉลี่ยอนุภาคขนาด 50.1 ของ lm ยังใช้ การใช้ polycarboxylate ผสมน้ำลดผลิต (HRWRA) ถูกใช้ในอัตราส่วน 0.15% โดยมวลของปูนซีเมนต์ มีขนาดอนุภาคเฉลี่ย nm และ NC ขนาดในช่วง 15 – 80 nm 20 NS ถูกรวมที่อัตรา 0.5%, 1.0%, 1.5% และ 2.0% สำหรับ NS และ 1.0%, 2.0%, 3.0% และ 4.0% NC บางส่วนโดยรวมแทนซีเมนต์ ตามลำดับแสดงรูปยการของ NS ใช้และภาพ SEM ของผง NC
การแปล กรุณารอสักครู่..
