Description
Screens
A dynamic and sensitive shading screen further reduces solar gain, acting as' Mashrabiya "secondary skin filters the light and reduces glare. The system is powered by renewable energy derived from photovoltaic panels. Wraps giant Lattice almost two towers completely except for the area north-facing facades.
"At night all screens fold, allowing more of the facade." "As the sun rises in the morning in the east, the mashrabiya along this side of the building will begin to close, and when the sun moves around the building, all vertical strip mashrabiya move with the sun, "says Ether Oborn, VP of Aedas, and one of the project architects.
Floor
Torres
The "cocoon buildings" are based on a pre-rationalized geometric shape, tuned via parametric design tools to achieve the optimal ratio of surface between the walls and floor.
The general form of the towers is optimized to complement the shading system. The design started with two simple cylinders, circular, yielding the most efficient in terms of "area-to-floor wall", creating more volume with less surface. Then, a circular shape is divided based on a combination of circular geometries to reduce solar exposure, and it started to generate a natural orientation. The shape of the towers was then sculpted around the core, narrower at the base and at the top, wider around the intermediate floors.
9 towers have elevators amounting to 5 meters per second.
รายละเอียด
แบบไดนามิกและหน้าจอหน้าจอแรเงาละเอียดอ่อนเพิ่มเติมลดพลังงานแสงอาทิตย์ได้รับหน้าที่เป็น ' mashrabiya ผิว " รอง กรองแสง และลดแสงสะท้อน . เป็นระบบที่ขับเคลื่อนโดยพลังงานที่ได้จากแผงเซลล์แสงอาทิตย์ ตัดตาข่ายยักษ์เกือบสองอาคารทั้งหมด ยกเว้นพื้นที่ทิศเหนืออาคาร
" ตอนกลางคืนทุกหน้าจอพับ ให้มากกว่าของซุ้ม ." " ดวงอาทิตย์ขึ้นในตอนเช้าในตะวันออก mashrabiya ตามแนวด้านข้างของอาคารจะเริ่มปิด และเมื่อดวงอาทิตย์เคลื่อนรอบอาคาร , แถบแนวตั้ง mashrabiya ย้ายกับซัน กล่าวว่า oborn อีเทอร์ , VP ของ aedas , และเป็นหนึ่งในสถาปนิกโครงการ
ชั้น
" ตอร์เรสรังอาคาร " ยึดก่อนเงินบาททางเรขาคณิตรูปร่างติดตามผ่านทางเครื่องมือการออกแบบพารามิเตอร์ให้เหมาะสมอัตราส่วนของพื้นผิวระหว่างผนังและพื้น
แบบฟอร์มทั่วไปของอาคารที่เหมาะเพื่อเสริมการระบบ การออกแบบเริ่มจากง่ายๆสองถัง , วงกลม , ที่มีประสิทธิภาพมากที่สุดในแง่ของ " บริเวณพื้นผนัง " , การสร้างไดรฟ์ข้อมูลเพิ่มเติมกับพื้นผิวน้อยกว่า จากนั้นรูปร่างวงกลมแบ่งตามการรวมกันของรูปทรงเรขาคณิตวงกลมเพื่อลดแสงพลังงานแสงอาทิตย์ และมันก็เริ่มที่จะสร้างแนวธรรมชาติ รูปร่างของอาคารที่ถูกแกะสลักรอบแกนแคบที่ฐานและที่ด้านบน กว้างรอบอาคารกลาง
9 อาคารลิฟท์ ประมาณ 5 เมตร ต่อ วินาที
การแปล กรุณารอสักครู่..
