aggregate (EPS) with non-absorbent, hydrophobic and close cellular
properties [74–106] was introduced as a lightweight material
by Cook in 1973 [104]. The EPS concrete has the potential to be
used as structural elements (cladding panels, curtain walls, load
bearing concrete blocks, composite flooring systems), protective
layers (good energy absorption), insulated concrete [105]. However,
the extremely low density and hydrophobic nature of EPS
beads constrains the application of EPS concrete. In fact, beads
tend to float (10–20 kg/m3) when used as lightweight aggregate
and causes serious segregation and poor mix distribution in the
matrix. The bonding additives such as epoxy resin (aqueous dispersions
of polyvinyl propionate), water-emulsified epoxies, and
chemically treated EPS [106] particles like BST used to increase
the interfacial bonding strength between beads and matrix. It
was reported that mineral admixture such as fly ash [74–76],
silica fume [77] and rice hush ash [77,78] were used as bonding
additives to increase the interfacial bonding strength between
beads and matrix and improve dispersion of EPS beads in the
cement matrix [77]. A significant improvement is observed in
terms of chemical attack and corrosion characteristics of concrete
when EPS aggregate is replaced with normal aggregate. One
researcher found [103] that the chloride permeability of polystyrene
concrete is a factor of EPS volume as increasing the volume of
polystyrene causes lower chloride permeability values (50–65%
lower). In addition, EPS concrete has better stability against
chemical attack which is due to the inert behaviour of EPS
aggregate.
รวม (EPS) กับไม่มีการดูดซึมไม่ชอบน้ำและปิดโทรศัพท์มือถือ
คุณสมบัติ [74-106] ถูกนำมาใช้เป็นวัสดุที่มีน้ำหนักเบา
โดยคุกในปี 1973 [104] คอนกรีตกำไรต่อหุ้นที่มีศักยภาพที่จะ
นำมาใช้เป็นองค์ประกอบโครงสร้าง (แผงหุ้มผนังม่านภาระ
แบกคอนกรีตบล็อก, ระบบพื้นคอมโพสิต) ป้องกัน
ชั้น (การดูดซับพลังงานดี), คอนกรีตฉนวน [105] แต่
มีความหนาแน่นต่ำมากและธรรมชาติที่ไม่ชอบน้ำของกำไรต่อหุ้น
ลูกปัด constrains การประยุกต์ใช้ EPS คอนกรีต ในความเป็นจริง, ลูกปัด
มีแนวโน้มที่จะลอย (10-20 kg / m3) เมื่อใช้รวมเป็นน้ำหนักเบา
และทำให้เกิดการแยกจากกันอย่างจริงจังและการกระจายการผสมผสานที่น่าสงสารใน
เมทริกซ์ สารพันธะเช่นอีพ็อกซี่เรซิน (กระจายน้ำ
โพลีไวนิล propionate), อีพ๊อกซี่น้ำ emulsified และ
กำไรต่อหุ้นการรักษาทางเคมี [106] อนุภาคเช่น BST ใช้เพื่อเพิ่ม
ความแข็งแรงพันธะ interfacial ระหว่างลูกปัดและเมทริกซ์ มัน
มีรายงานว่าแร่ผสมเช่นเถ้าลอย [74-76],
ซิลิกาฟูม [77] และข้าว Hush เถ้า [77,78] ถูกนำมาใช้เป็นพันธะ
สารเติมแต่งเพื่อเพิ่มความแข็งแรงพันธะ interfacial ระหว่าง
ลูกปัดและเมทริกซ์และปรับปรุงการกระจายตัวของกำไรต่อหุ้น ลูกปัดใน
เมทริกซ์ปูนซีเมนต์ [77] การปรับปรุงที่สำคัญเป็นที่สังเกตใน
แง่ของการโจมตีทางเคมีและลักษณะการกัดกร่อนของคอนกรีต
เมื่อกำไรต่อหุ้นรวมจะถูกแทนที่ด้วยการรวมปกติ หนึ่งใน
นักวิจัยพบ [103] ว่าการซึมผ่านของคลอไรด์ของสไตรีน
ที่เป็นรูปธรรมเป็นปัจจัยของปริมาณกำไรต่อหุ้นขณะที่การเพิ่มปริมาณของ
สไตรีนทำให้ค่าการซึมผ่านของคลอไรด์ที่ต่ำกว่า (50-65%
ต่ำกว่า) นอกจากนี้ EPS คอนกรีตมีเสถียรภาพที่ดีขึ้นกับ
การโจมตีทางเคมีซึ่งเกิดจากการพฤติกรรมเฉื่อยของกำไรต่อหุ้น
รวม
การแปล กรุณารอสักครู่..
