Most of the pieces have wide difference (1mm or more) between before and after repair.
EDS performed restoration for Inlet portion, but instead of it, other repair works carried out may not cause such change between before and after.
Therefore, we would like EDS to re-measure the portion.
When measure again, please be sure if the jig is correctly set, such as (1) if the slide at inlet is fully down to the bottom and (2) when insert Gusset pin, if the pins was fitting suitably, not tight too much.
Most of the pieces have wide difference (1mm or more) between before and after repair. EDS performed restoration for Inlet portion, but instead of it, other repair works carried out may not cause such change between before and after.Therefore, we would like EDS to re-measure the portion. When measure again, please be sure if the jig is correctly set, such as (1) if the slide at inlet is fully down to the bottom and (2) when insert Gusset pin, if the pins was fitting suitably, not tight too much.
การแปล กรุณารอสักครู่..
