I can see the incorrect readings are still being reported, I will need to look into this further – I have also asked Mike at Waterside to switch all units on and leave on overnight so I can run some diagnostics on the fleetPlease see below description on the different alerts:• Car alert:o This alert is flagged when the cart controller flags an issue e.g. motor short circuit, action zone entered (if setting is selected) etc… • Charge alerts:o Incomplete/failed charge alert: An Incomplete/failed charge alert indicates that the car was plugged into the charger and was unplugged prior to reaching a high state of charge. Cause: A car was not left on the charger ample time allowing the batteries to receive a full charge.o Inoperable charger alert: An inoperable charger alert indicates that the charge cycle did not begin. Cause(s): Charger is defective. Charger is not plugged into an outlet. No power going to charger. Charger plug (charger to car) is not seated or has become unplugged from charger.The charge alerts will automatically clear when the next charge cycle is complete