This paper aims to experimentally investigate flue gaseous
emissions, particularly CO, NOx, and particle emission (PM10/PM2.5),
of a domestic wood pellet boiler under various combustion cases.
The novel design of flue gas intake, filter and condensed pipe line is
applied to accurately attain emission outcomes. An ABB continuous
gas analyser with infrared spectroscopy is used to measure the
compositions of CO2, CO and O2; a Horiba chemiluminescent NOx
analyser is applied to examine NOx emission. In the factory-set air
intake opening of the biomass boiler, the flue gas emissions
measured are NOx 54.92 ppmv, CO2 11.98 vol%, CO 0.24 vol%, O2
8.19 vol% and PM0.1e10 concentrations 72.7 mg/Nm3 by burning
wood pellets. The detrimental emissions have a bad impact on local
air quality and affect human health. It is essential that cleaning of the flue gas would meet certain emission control requirements in
order to protect local air quality. Pollution control technologies are
ever-increasingly concerned in response to a clear demand to
support climate change and pollutant emissions reduction strategies.
The state-of-the-art particle emission cleaning technologies
are also introduced and ceramic filter is able to remove up to 96% of
PM2.5 and PM10 particles.
บทความนี้มีจุดมุ่งหมายเพื่อการทดลองตรวจสอบปล่องก๊าซ
ปล่อยก๊าซเรือนกระจกโดยเฉพาะอย่างยิ่ง CO, NOx และการปล่อยอนุภาค (PM10 / PM2.5)
ของหม้อไอน้ำเม็ดไม้ในประเทศภายใต้กรณีการเผาไหม้ต่างๆ
การออกแบบใหม่ของปริมาณก๊าซไอเสียกรองและท่อแบบย่อ ถูก
นำมาใช้อย่างถูกต้องบรรลุผลการปล่อย ABB อย่างต่อเนื่อง
การวิเคราะห์ก๊าซกับอินฟราเรดถูกนำมาใช้ในการวัด
องค์ประกอบของ CO2, CO และ O2; Horiba chemiluminescent NOx
วิเคราะห์ที่นำมาใช้ในการตรวจสอบการปล่อย NOx ในอากาศที่โรงงานตั้ง
เปิดการบริโภคของหม้อไอน้ำชีวมวล, การปล่อยก๊าซเรือนไฟ
วัดเป็น NOx 54.92 ล้านส่วนปริมาตร, CO2 11.98% โดยปริมาตร, CO 0.24% โดยปริมาตร, O2
8.19% โดยปริมาตรและ PM0.1e10 เข้มข้น 72.7 mg / Nm3 จากการเผาไหม้
เม็ดไม้ . การปล่อยก๊าซที่เป็นอันตรายมีผลกระทบที่ไม่ดีในท้องถิ่น
ที่มีคุณภาพอากาศและส่งผลกระทบต่อสุขภาพของมนุษย์ มันเป็นสิ่งสำคัญที่การทำความสะอาดของก๊าซไอเสียจะตอบสนองความต้องการการควบคุมการปล่อยก๊าซบางอย่างใน
การที่จะปกป้องคุณภาพอากาศในท้องถิ่น เทคโนโลยีการควบคุมมลพิษที่
เกี่ยวข้องเคยมากขึ้นในการตอบสนองต่อความต้องการที่ชัดเจนในการ
สนับสนุนกลยุทธ์การเปลี่ยนแปลงภูมิอากาศและลดการปล่อยมลพิษ
รัฐของศิลปะเทคโนโลยีการทำความสะอาดการปล่อยอนุภาค
ได้ถูกนำเสนอและยังกรองเซรามิกสามารถลบได้ถึง 96% ของ
PM2.5 และอนุภาค PM10
การแปล กรุณารอสักครู่..
