2.1 Introduction to surface irrigation
2.1.1 Definition
Surface irrigation has evolved into an extensive array of configurations which can be broadly classified as: (1) basin irrigation; (2) border irrigation; (3) furrow irrigation; and (4) uncontrolled flooding. As noted previously, there are two features that distinguish a surface irrigation system: (a) the flow has a free surface responding to the gravitational gradient; and (b) the on-field means of conveyance and distribution is the field surface itself.
A surface irrigation event is composed of four phases as illustrated graphically in Figure 1. When water is applied to the field, it 'advances' across the surface until the water extends over the entire area. It may or may not directly wet the entire surface, but all of the flow paths have been completed. Then the irrigation water either runs off the field or begins to pond on its surface. The interval between the end of the advance and when the inflow is cut off is called the wetting or ponding phase. The volume of water on the surface begins to decline after the water is no longer being applied. It either drains from the surface (runoff) or infiltrates into the soil. For the purposes of describing the hydraulics of the surface flows, the drainage period is segregated into the depletion phase (vertical recession) and the recession phase (horizontal recession). Depletion is the interval between cut off and the appearance of the first bare soil under the water. Recession begins at that point and continues until the surface is drained.