2. Materials and methods
2.1. Experiment
2.1.1. Chamber
To simulate the hot and humid environments, a stainless
steel chamber with the size of 5 m 4 m 3 m
(length width height) was built. The heat source of the
chamber was provided by stainless steel flake-shaped heaters and
the humidity source was provided by stainless steel humidifiers.
The temperature and relative humidity in the chamber could be
adjusted from 20 C to 85 C and 20%e98%. There was a temperature
and humidity probe on the top of the chamber to
monitor the real-time temperature and relative humidity. To
maintain the temperature and relative humidity, the chamber
was airtight and well insulated. In addition, to ensure the security
of the people in the chamber, an alarm function and protection
system was installed in the chamber.
2.1.2. Subjects
To ensure the success of the experiment, the subjects should
have good health and have no disease histories. In this experiment,
5 male university students were selected as the subjects, and their
average age, height, weight and body surface area were 23.8 0.4
years, 1.72 0.05 m, 64.7 10.8 kg and 1.75 0.15 m2.
2.1.3. Parameters and instruments
To study the relationships between the physiological responses
and their influencing factors, the physiological parameters
and their corresponding instruments in the experiment are
shown in Table 1. In the table, the rectal temperature and heart
rate were used to reflect the physiological responses and
calculate the PSI, and the weight was used for the calculation of
sweat rate.
2.1.4. Experiment condition
To study the effects of temperature, relative humidity and work
intensity on human heat strain, the experiment was conducted
with different combinations of temperatures, relative humidity and
work intensities. The environment conditions are shown in Table 2.
During the experiment, the work intensities were divided
into three kinds [18,19]: light work, moderate work and heavy
work. Sitting was selected as a light work, running on a treadmill
with a speed of 3.5 km/h was considered as a moderate work,
and running with a speed of 5.5 km/h was regarded as a heavy
work. In the real life, office work would be a light work, picking
fruit or transporting medium heavy items may be a moderate
work, and mining or transporting heavy items would be a heavy
work [19].
All subjects were asked to take part in all types of experiment
conditions.
2.1.5. Experiment process
In order to stabilize the physiological parameters, the subjects
were asked to rest for 20e40 min before the experiment. After
entering the chamber, the physiological parameters of the subjects
were measured, and then the work started. During the experiment,
the subjects were required to work for 80 min and they had a 10-
min rest for every 20-min work. The rectal temperature, heart
rate and nude body weight were measured during the break. The
subjects were allowed to drink water during the work, and the
weights of water they had drunk were also measured in the 10-min
rest. The subjects were not requested to insist to the end of the 80-
min work, and when they could not persist, their physiological
parameters and work time were recorded immediately.
Before the experiment, the subjects were requested to sign an
agreement of joining the experiment. To ensure the subjects were
familiar with the experiment process, they were trained before the
experiment, and they were also asked to have good sleeps and
healthy eating habits during the experiment period.
The experiment scheme and process were approved by the
ethics committee of Tianjin University of Traditional Chinese
Medicine and the grant number was TJUTCM-EC20110004.
2.2. Commonly used indices in hot and humid environments
2.2.1. Sweat rate
The ability of human body to dissipate heat in hot environments
mainly depends on the evaporation of sweat, thus the sweat production
is essential to prevent the hyperthermia and heat-related
illness [20,21]. Sweat rate is the sweat quantity of human body
per unit time and it reflects the ability of human body to remove
the extra heat by sweating.
2 . วัสดุและวิธีการ
2.1 . การทดลอง
2.1.1 . ห้อง
เพื่อจำลองสภาพแวดล้อมที่ร้อนและชื้น ห้อง
ด้วยสแตนเลสขนาด 5 เมตร 4 M 3 M
( ความยาวความกว้างความสูง ) ถูกสร้างขึ้น แหล่งความร้อนของ
ห้องโดยเกล็ดสแตนเลสรูปเครื่องและ
ความชื้นที่มาได้มาจากความชื้น สแตนเลส
อุณหภูมิและความชื้นสัมพัทธ์ในห้องสามารถปรับได้จาก
20 C ถึง 85 C และ 20 % e98 % มีอุณหภูมิและความชื้น
หัวด้านบนของห้อง
เวลาตรวจสอบอุณหภูมิและความชื้นสัมพัทธ์
รักษาอุณหภูมิ และความชื้นสัมพัทธ์ ในห้อง
เป็นอัดลมและหุ้มฉนวน นอกจากนี้ เพื่อความปลอดภัย
ของคนในห้องฟังก์ชั่นเตือนและป้องกัน
ติดตั้งในห้อง .
2.1.2 . วิชา
เพื่อความสำเร็จของการทดลองวิชาควร
มีสุขภาพที่ดีและไม่มีประวัติโรค ในการทดลองนี้
นักเรียน 5 มหาวิทยาลัยชายได้รับเลือกเป็นประธาน และของพวกเขา
เฉลี่ยอายุ , ความสูง , น้ำหนักและร่างกายพื้นที่ผิวเท่ากับ 23.8 0.4
ปี 1.72 0.05 เมตร 64.7 10.8 กก. และ 175 0.15 m2
ทาง . พารามิเตอร์และเครื่องมือ
เพื่อศึกษาความสัมพันธ์ระหว่างการตอบสนองทางสรีรวิทยา
และปัจจัยที่มีอิทธิพลต่อ , สรีรวิทยา
และเครื่องมือที่สอดคล้องกันของพวกเขาในการทดลอง
แสดงดังตารางที่ 1 ในโต๊ะ อุณหภูมิร่างกายและหัวใจ
คะแนนถูกใช้เพื่อสะท้อนให้เห็นถึงการตอบสนองทางสรีรวิทยาและ
คำนวณพไซและน้ำหนักที่ใช้ในการคำนวณอัตราเหงื่อ
.
2.1.4 . ทดสอบเงื่อนไข
เพื่อศึกษาผลของอุณหภูมิ ความชื้นสัมพัทธ์ และความรุนแรง
ในความร้อนของมนุษย์สายพันธุ์ทำการ
กับชุดที่แตกต่างกันของอุณหภูมิความชื้นสัมพัทธ์และ
งานเข้ม . เงื่อนไขสภาพแวดล้อมที่แสดงในตารางที่ 2 .
ในระหว่างการทดลองงานเข้มแบ่งออกเป็น 3 ชนิด 18,19
[ ] : งานเบา งานปานกลาง และทำงานหนัก
นั่งอยู่ก็ถูกเลือกให้เป็นงานเบา วิ่งบนลู่วิ่ง
ด้วยความเร็ว 3.5 km / h ถือเป็นงานปานกลาง
และวิ่งด้วยความเร็ว 5.5 km / h ก็ถือได้ว่าเป็นงานหนัก
ในชีวิตจริง งานสำนักงาน จะเป็นงานเบารับ
ผลไม้หรือการขนส่งสินค้าหนักปานกลางอาจจะทำงานปานกลาง
, เหมืองแร่และการขนส่งสินค้าหนักหรือจะเป็นหนักงาน [ 19 ]
.
ทั้งหมดให้กลุ่มตัวอย่างมีส่วนร่วมในทุกประเภทของเงื่อนไขการทดลอง
.
2.1.5 . ทดลองกระบวนการ
เพื่อรักษาเสถียรภาพของสรีรวิทยา , วิชา
ขอให้พักผ่อน 20e40 มินก่อนการทดลอง หลังจาก
เข้าห้อง ,ตัวแปรทางสรีรวิทยาของวิชา
วัดแล้วเริ่มทํางาน ในระหว่างการทดลอง
จำนวนต้องทำงาน 80 นาทีและพวกเขามี 10 -
มินพักทุกๆ 20 นาที งาน อุณหภูมิทวารหนัก , อัตราการเต้นหัวใจ
และน้ำหนักตัวนู้ดวัดในช่วงพัก
คนได้รับอนุญาตให้ดื่มน้ำในระหว่างการทำงานและ
น้ำหนักของน้ำที่พวกเขาดื่มยังวัดได้ใน 10 นาที
ส่วนที่เหลือ วิชาที่ไม่ได้ร้องขอ เพื่อยืนยันถึงปลาย 80 -
มินทำงานและเมื่อพวกเขาไม่สามารถคงอยู่ของสรีรวิทยา
พารามิเตอร์ และเวลาในการทำงานที่ถูกบันทึกไว้ทันที
ก่อนการทดลองกลุ่มตัวอย่างถูกขอให้ลงนามในข้อตกลงร่วม
การทดลอง เพื่อให้แน่ใจว่าจำนวน
คุ้นเคยกับกระบวนการทดลอง พวกเขามีการฝึกอบรมก่อน
การทดลอง และพวกเขายังถูกถามเพื่อ มี ดี นอนและ
การรับประทานอาหารในช่วงระยะเวลาการทดลอง การทดลองรูปแบบและกระบวนการ
ได้รับการอนุมัติโดยคณะกรรมการจริยธรรมของเทียนจินมหาวิทยาลัยการแพทย์จีนแบบดั้งเดิมและให้เบอร์
tjutcm-ec20110004 . 2.2 .มักใช้ดัชนีในร้อนและสภาพแวดล้อมที่ชื้น
2.2.1 . คะแนนเหงื่อ
ความสามารถของร่างกายมนุษย์เพื่อกระจายความร้อนในสภาพแวดล้อมที่ร้อน
ขึ้นอยู่กับการระเหยของเหงื่อ ดังนั้นเหงื่อการผลิต
เป็นสิ่งจำเป็นเพื่อป้องกันอุณหภูมิและความร้อนที่เกี่ยวข้องกับการเจ็บป่วย 20,21
[ ] อัตราปริมาณเหงื่อเป็นเหงื่อของร่างกายมนุษย์
ต่อหน่วยเวลา และมันสะท้อนให้เห็นถึงความสามารถของร่างกายมนุษย์เพื่อลบ
เพิ่มความร้อนด้วยเหงื่อ
การแปล กรุณารอสักครู่..
