When installing UltraGauge in your vehicle, place UltraGauge so that it does not obstruct the driver’s view of the road or ability
to operate the vehicle.
• Extreme care must be taken when routing the OBD II cable. Avoid routing and installing in such a fashion that the cable can
interfere with any of the foot controls, steering wheel, or other vehicle controls, or represent an entry or exit hazard to the driver.
Always secure excess or loose cable so that feet and hands do no become entangled.
• The windshield mount or Velcro mount may not stay attached under all conditions. Do not mount UltraGauge where it will
become a distraction or hazard should it become detached.
• Do not mount UltraGauge in an area that may interfere with the deployment of airbags. Consult your vehicles owner’s manual.
• UltraGauge in rare circumstances may impair select vehicle systems. See the Forced Protocol section for more information and
resolution.
• Tightening the windshield mount locking ring will result in increased force necessary to adjust the position of UltraGauge and if
over tightened may result in damage. The ring should be adjusted so that the ball swivel offers a very slight resistance to
movement.