Sampling and analysis
Sample collection
Sampling of PM2.5 was carried out at a height of 12 m from
the ground level at terrace of Department of Chemistry,
University of Pune, Pune, between June and September for
two consecutive years (i.e., 2010 and 2011) (Fig. 1). 24-h
PM2.5 samples were collected with (Mini-Vol TAS airsampler) particulate sampler which runs at a constant flow
rate of 5 LPM. The particles (PM2.5) were collected on
47-mm diameter PTFE filter papers. PTFE filter has a fiber
structure and good for studying the gravimetric as well as
elemental analysis by XRD. For morphology study, PTFE
filter is causing the positive artifacts and uncertainties
because of its fiber structure. But, still some studies have been reported SEM–EDS on PTFE (Wheeler et al. 2000;
Xie et al. 2009; Slezakova et al. 2008; Pipal et al. 2011).
Moreover, present study was performed during the monsoon
season (June–September) when the relative humidity
is very high (80–90 %). In this regard, PTFE is very stable
and absorbing negligible water or gases. It has inherently
low contamination levels.
การเก็บตัวอย่างและการวิเคราะห์
ตัวอย่างคอลเลกชัน
การสุ่มตัวอย่างของ PM2.5 ได้ดำเนินการที่มีความสูง 12 เมตรจาก
ระดับพื้นดินที่ระเบียงของภาควิชาเคมี
มหาวิทยาลัยปูน, ปูน, ระหว่างเดือนมิถุนายนและเดือนกันยายนสำหรับ
สองปีติดต่อกัน (เช่นปี 2010 และ 2011 ) (รูปที่ 1). 24-H
ตัวอย่าง PM2.5 ถูกเก็บรวบรวมด้วย (Mini-ฉบับมาตรฐานการบัญชีฉบับ airsampler) ตัวอย่างอนุภาคซึ่งทำงานที่ไหลคงที่
อัตรา 5 ลิตรต่อนาที อนุภาค (PM2.5) ได้รับการรวบรวมไว้ใน
47 มิลลิเมตรเส้นผ่าศูนย์กลางเอกสารกรอง PTFE กรอง PTFE มีเส้นใย
โครงสร้างและการที่ดีในการศึกษา gravimetric เช่นเดียวกับ
การวิเคราะห์ธาตุโดย XRD สำหรับการศึกษาลักษณะทางสัณฐานวิทยา, PTFE
กรองที่เป็นสาเหตุของสิ่งประดิษฐ์เชิงบวกและความไม่แน่นอน
เนื่องจากโครงสร้างของเส้นใย แต่ยังคงมีการศึกษาบางส่วนได้รับการรายงาน SEM-EDS ใน PTFE (ล้อ et al, 2000.
Xie et al, 2009. Slezakova et al, 2008.. Pipal et al, 2011).
นอกจากนี้ยังมีการศึกษาปัจจุบันได้ดำเนินการในช่วงมรสุม
ฤดู ( เดือนมิถุนายนถึงกันยายน) เมื่อความชื้นสัมพัทธ์
สูงมาก (80-90%) ในเรื่องนี้ PTFE มีเสถียรภาพมาก
และดูดซับน้ำเล็กน้อยหรือก๊าซ มันมีเนื้อแท้
ระดับการปนเปื้อนในระดับต่ำ
การแปล กรุณารอสักครู่..
