Continuous dosing of irrigation water with any sanitiser is critical. If not dosed, crops are at risk
of pathogens being introduced.
•When using Sporekill® for the first time, do a Sporekill® “shock-treatment” of the entire irrigation
line first. As a result dirt/ algae/ organic matter will be discharged, and might clog the drippers or
spitters. Open the line-ends and rinse the lines a couple of times. Do not irrigate the higher
“shock-treatment” Sporekill® rate onto the crop. An initial “shock-treatment” is also required prior
to the continuous treatment of wet-walls.
•DO NOT USE Sporekill® in recycled bare root hydroponic systems.
•Water source used must be physically clean. Avoid too much organic content. If possible apply
Sporekill® after final filter.
SPOREKILL® APPLICATION: Irrigation water – Application methods
Sporekill® Nufarm Malaysia 2014
PRACTICAL HINTS
•Continuous dosing of irrigation water with any sanitiser is critical. If not dosed, crops are at risk
of pathogens being introduced.
•When using Sporekill® for the first time, do a Sporekill® “shock-treatment” of the entire irrigation
line first. As a result dirt/ algae/ organic matter will be discharged, and might clog the drippers or
spitters. Open the line-ends and rinse the lines a couple of times. Do not irrigate the higher
“shock-treatment” Sporekill® rate onto the crop. An initial “shock-treatment” is also required prior
to the continuous treatment of wet-walls.
•DO NOT USE Sporekill® in recycled bare root hydroponic systems.
•Water source used must be physically clean. Avoid too much organic content. If possible apply
Sporekill® after final filter.