Surface application
Septage can be applied to the land as a fertilizer and
soil conditioner. Application rates depend on the
slope, soil type, depth of application, drainage class,
and hydraulic loading. Septage must not be applied
before or during rainfall or on frozen ground. Thus,
an interim storage facility is needed. Some states
require septage to be disinfected before application.
• Spray Irrigation-pretreated (e.g., screened)
septage is pumped at 80 to 100 psi through
nozzles and sprayed directly onto the land.
Spray irrigation can be used on steep or
rough land and minimizes disturbances to
the soil by trucks. It is important to
consider the wind patterns and the site
location when using spray irrigation because
of the offensive odors associated with
septage.
• Ridge and Furrow Irrigation-this is used for
relatively level land, with slopes no greater
than 0.5 to 1.5%. In this disposal method,
pretreated septage is applied directly to
furrows or to row crops that will not be
directly consumed by humans.
• Hauler Truck Spreading-septage is applied
to the soil directly from a hauler truck that
uses a splash plate to improve distribution.
The same truck that pumps out the septic
tank can be used for transporting and
disposing the septage.
• Farm Tractor and Wagon Spreading-liquid
septage or septage solids are transferred to
farm equipment for spreading. This allows
for application of liquid or solid septage.
However, if the septage was not lime
stabilized, then the septage must be
incorporated into the soil within 6 hours.
Subsurface Incorporation
Subsurface incorporation places untreated septage
just below the soil surface, reducing odors and
health risks while fertilizing and conditioning the
soil. Septage can only be applied to slopes less than
8%, and the soil depth to seasonal high water table
must be at least 20 inches (or as mandated by local
regulations). A holding facility is required during
periods of wet or frozen ground. To prevent soil
compaction and allow sufficient infiltration,
equipment must not be driven over the site until 1 to
2 weeks after application.
• Plow and Furrow Cover-typically, a
moldboard plow is used with furrow wheels
and coulters. The coulter blade slits the
ground ahead of a plow. Liquid septage is
discharged from a tank into a narrow furrow
about 15 to 20 cm deep and is then covered
by a second plow.
• Subsurface Injection-liquid septage is
injected in a narrow cavity created by a
tillage tool. The opening is about 10 to 15
cm below the surface. Some equipment
uses a forced closure of the injection swath.
Burial
Septage burial includes disposal in holding lagoons,
trenches, and sanitary landfills. There is a high odor
potential during septage application until a final
cover is placed on top. It is essential to select an
appropriate site for disposal not only to control
odors, but to avoid groundwater pollution.
• Holding Lagoons- these disposal lagoons
are a maximum of 6 feet deep, with septage
placed in small incremental lifts of 15 to 30
cm and no infiltration. Multiple lagoons are
loaded in sequential order for optimum
drying. To decrease odors, the lagoon inlet
pipe can be placed below liquid level.
• Trenches-multiple trenches are filled
sequentially with septage in small lifts of 15
to 20 cm for optimum drying. Each trench
is then covered with soil (2 feet), and new
trenches are opened. Another option is to
leave a filled trench uncovered to enable
some solids to settle and liquids to
evaporate and leach out. The solids, along
with some bottom and sidewall material, are
removed and the trench can be reused.
แอพลิเคชันพื้นผิวSeptage ใช้ที่ดินเป็นเป็นปุ๋ย และครีมนวดผมดิน ราคาพิเศษในแอพลิเคชันขึ้นอยู่กับการความชัน ชนิดของดิน ความลึกของแอพลิเคชัน ชั้นระบายน้ำและการโหลดไฮดรอลิก Septage ต้องไม่ใช้ก่อน หรือใน ช่วงฝนตก หรือบนแช่แข็งพื้น ดังนั้นต้องการสถานที่เก็บชั่วคราว อเมริกาบางต้อง septage จะฆ่าเชื้อก่อน•สเปรย์ pretreated ชลประทาน (เช่น ฉาย)septage เป็นสูบที่ 80-100 psi ผ่านหัวฉีด และฉีดพ่นโดยตรงบนแผ่นดินชลประทานสเปรย์สามารถใช้ได้สูงชัน หรือคายดิน และลดการรบกวนการดิน โดยรถบรรทุก จำเป็นต้องพิจารณารูปแบบลมและเว็บไซต์สถานเมื่อใช้สเปรย์ชลประทานเนื่องจากของกลิ่นไม่เหมาะสมที่เกี่ยวข้องกับseptage•ริดจ์และ Furrow ชลประทานนี้จะใช้สำหรับที่ดินค่อนข้างระดับ มีลาดไม่มากกว่า 0.5-1.5% วิธีนี้กำจัดใช้ pretreated septage โดยตรงfurrows หรือพืชแถวที่จะไม่โดยตรงใช้ โดยมนุษย์•รถบรรทุก hauler Spreading-septage จะใช้ในดินโดยตรงจาก hauler เป็นรถที่ใช้จานสาดเพื่อปรับปรุงการกระจายเหมือนรถที่ปั๊มออกแบบบำบัดน้ำเสียถังสามารถใช้สำหรับการขนส่ง และทิ้ง septage•รถแทรกเตอร์ฟาร์มและ Wagon แพร่กระจายของเหลวseptage หรือของแข็ง septage ถูกโอนย้ายไปอุปกรณ์ฟาร์มสำหรับแพร่กระจาย นี้ช่วยให้ใช้ของเหลว หรือของแข็ง septageHowever, if the septage was not limestabilized, then the septage must beincorporated into the soil within 6 hours.Subsurface IncorporationSubsurface incorporation places untreated septagejust below the soil surface, reducing odors andhealth risks while fertilizing and conditioning thesoil. Septage can only be applied to slopes less than8%, and the soil depth to seasonal high water tablemust be at least 20 inches (or as mandated by localregulations). A holding facility is required duringperiods of wet or frozen ground. To prevent soilcompaction and allow sufficient infiltration,equipment must not be driven over the site until 1 to2 weeks after application.• Plow and Furrow Cover-typically, amoldboard plow is used with furrow wheelsand coulters. The coulter blade slits theground ahead of a plow. Liquid septage isdischarged from a tank into a narrow furrowabout 15 to 20 cm deep and is then coveredby a second plow.• Subsurface Injection-liquid septage isinjected in a narrow cavity created by atillage tool. The opening is about 10 to 15cm below the surface. Some equipmentuses a forced closure of the injection swath.BurialSeptage burial includes disposal in holding lagoons,trenches, and sanitary landfills. There is a high odorpotential during septage application until a finalcover is placed on top. It is essential to select anappropriate site for disposal not only to controlodors, but to avoid groundwater pollution.•ถือทะเลสาบ - ทะเลสาบเหล่านี้ทิ้งมีจำนวน 6 ฟุตลึก กับ septageอยู่ในลิฟท์ขนาดเล็กเพิ่มขึ้น 15-30ซม.และไม่แทรกซึม มีทะเลสาบหลายโหลดตามลำดับเพื่อให้เหมาะสมแห้ง ลดกลิ่น ทางเข้าของลากูนสามารถวางท่ออยู่ต่ำกว่าระดับของเหลว•หลาย trenches trenches ถูกเติมมี septage ในลิฟท์ขนาดเล็ก 15 ตามลำดับซม. 20 สำหรับการอบแห้งที่เหมาะสม แต่ละร่องลึกแล้วปกคลุม ด้วยดิน (2 ฟุต), และใหม่มีเปิด trenches อีกทางเลือกหนึ่งคือการปล่อยให้ร่องลึกเต็มที่เปิดให้บางสีทึบเพื่อชำระและของเหลวไประเหย และ leach ออก ของแข็ง พร้อมด้วยวัสดุบางล่างและแก้มเอาออก และร่องลึกสามารถนำมา
การแปล กรุณารอสักครู่..
