Many researchers
(Guo et al., 2010; Hall and Williams, 2006a, 2006b) had studied
the pyrolysis of WEEE plastics in a fluidized bed reactor. Fig. 6
shows the schematic diagram of the fluidized bed reactor used in
an experiment of Hall and Williams (2006a) which measures 1 m
in height by 120 mm in diameter. In their work, brominated HIPS
was pyrolysed at temperatures of 450, 500 and 550 C with a
aim of investigating the flash pyrolysis behavior of HIPS containing
flame retardants of DDO, characterizing the pyrolysis products and
determining the distribution of bromine and antimony among gas,
liquid and solid products. The sample pyrolysed and formed an
average of 94 wt%, 89.9 wt% and 93 wt% oil with a small amount
of gas and solid products at three temperatures respectively.
GC–MS analysis showed that oil products mainly comprised of
benzene, toluene, ethylbenzene, styrene and cumene. And it was
revealed that there was a significant concentration of molecules
with a molecular mass of 125–140 Da (Fig. 7) in all three oils.
But more than 98% of the noxious bromine existed in the oil products,
and only less than 2% bromine released in the form of HBr or
Br2 that were absorbed by the alkali solution of Na2CO3 and
NaHCO3.
นักวิจัยหลายคน
(Guo et al, 2010;. ฮอลล์และวิลเลียมส์, 2006a, 2006b)
ได้ศึกษาไพโรไลซิพลาสติกWEEE ในเครื่องปฏิกรณ์เตียง fluidized มะเดื่อ. 6
แสดงแผนภาพของเครื่องปฏิกรณ์เตียง fluidized
ใช้ในการทดลองของฮอลล์และวิลเลียมส์(2006a) ซึ่งมาตรการ 1
เมตรในระดับความสูง120 มม ในการทำงานของพวกเขาโบรมีน HIPS
ถูก pyrolysed ที่อุณหภูมิ 450, 500 และ 550
องศาเซลเซียสที่มีจุดมุ่งหมายของการตรวจสอบพฤติกรรมการไพโรไลซิแฟลชของHIPS
ที่มีสารทนไฟของDDO
พัฒนาการผลิตภัณฑ์ไพโรไลซิและการพิจารณาการกระจายของโบรมีนและพลวงหมู่ก๊าซ
ของเหลวและผลิตภัณฑ์ที่เป็นของแข็ง ตัวอย่าง pyrolysed
และเกิดขึ้นเฉลี่ย94% โดยน้ำหนัก, 89.9% โดยน้ำหนักและน้ำมัน 93%
โดยน้ำหนักมีจำนวนน้อยของก๊าซและผลิตภัณฑ์ที่เป็นของแข็งที่สามอุณหภูมิตามลำดับ.
วิเคราะห์ GC-MS
พบว่าผลิตภัณฑ์น้ำมันส่วนใหญ่ประกอบด้วยเบนซีนโทลูอีน, ethylbenzene สไตรีนและคิวมีน และมันก็แสดงให้เห็นว่ามีความเข้มข้นอย่างมีนัยสำคัญของโมเลกุลที่มีมวลโมเลกุลของ125-140 ดา (รูปที่. 7) ในทั้งสามน้ำมัน. แต่กว่า 98% ของโบรมีนพิษมีอยู่ในผลิตภัณฑ์น้ำมันและมีเพียงน้อยกว่าโบรมีน 2% ปล่อยออกมาในรูปแบบของ HBr หรือBR2 ที่ถูกดูดซึมโดยวิธีการแก้ปัญหาของอัลคาไล Na2CO3 และNaHCO3
การแปล กรุณารอสักครู่..
