Choose an area where do not have any high-rise building and no magnetic interference
environment, connect with power, red LED light shall blink twice to entering in to satellite
search mode, warm up around 1 minute, when the red LED light change from blink twice
to slow blinking, the satellite searching is completed and the position locating is
successful.
Switch the remote control CH5 flight mode to GPS mode position (user can also switch to
this mode during the flight), disarm your aircraft, increase the throttle to 50% and above
level to make the aircraft lifting from the ground, aircraft shall be lifting vertically. After
the aircraft reached the desired altitude, decrease the throttle to 50% level, the aircraft
shall hovering at the height automatically, if the user adjust the aileron and elevation, the
aircraft will keep flying at the height.
Precaution: P2 Flight controller working under GPS flight mode is involved with Compass
as assist, you must stay away from strong magnetic field; while the GPS module is also
involved in this mode, you need to choose a good GPS, and Satellite signal area (shall stay
away from high rise building)