Revolutionary Textile Dyeing Products Save Water
The next time you slip on a polo shirt from Lacoste™ or Marks & Spencer, you can take comfort in knowing the process used to dye the fabric is contributing to the sustainability of one of our most precious resources–water.
The mills that these two clothing brands buy fabric from are using revolutionary product AVITERA™ SE, created by Huntsman to significantly reduce water and energy consumption, as well as carbon dioxide(CO2) emissions during the dyeing and washing-off process.
Why it matters
By 2030, the world demand for fresh water will increase by 40 percent. Textile dyeing and finishing processes consume vast amounts of water – in the very parts of the world where it is most scarce. As environmental awareness grows, so does demand for textiles produced in more sustainable ways – yet at low cost.
Up to 26 gallons (100 liters) of water is needed to dye just two pounds (one kilogram) of cotton fabric. With AVITERA™ SE, water usage is reduced to just three to five gallons (15 to 20 liters) per two pounds of material. With the new dyeing technology, one quart (1.3 liters) of fresh water per person per day could potentially be saved in the major Asian textile processing countries such as China, India and Bangladesh.
How it works
Cellulose fibers, such as cotton, viscose or linen, are the most widely used textile fibers. Depending on the year and crop yields, about 30 millions tons of cotton are produced annually. By far the largest part of cellulose fibers is cotton. Pure cotton is mostly dyed using reactive dyes.
The dyeing process takes place in three distinct phases:
Adsorption and Diffusion
The reactive dye is adsorbed onto the cellulose surface and then diffuses into the fiber matrix.
Fixation
If conditions are favorable (high temperature and/or high pH), the reactive dye reacts with active sites in the cellulose during this phase (fixation), resulting in a strong covalent bond.
Washing Off
To obtain the required fastness properties, all these forms of unfixed, adsorbed dye molecules must be washed off the fiber.
Industrial practice has shown that with AVITERA SE, nearly 90 percent of the dye applied to cotton during dyeing is fixed, as opposed to 60 to 80 percent with conventional reactive dyes. This ensures higher yield.
Fabrics can be dyed and washed off at different temperatures and different quantities of water. Hot dyeing systems require a temperature of 176°F (80°C) to make the bond between dyestuff and fabric permanent. These systems also require boiling water and several rinsing baths to completely remove unfixed dyestuffs.
Conventional warm dyeing systems already offer the benefit of creating the necessary bonds at a lower temperature—140°F (60°C)—but still require a lot of water and high temperature for an appropriate wash-off.
AVITERA SE dyes help significantly reduce water and energy consumption and CO2 emissions since dyeing and the washing-off process never exceeds 60°C.With only five percent or less unfixed dye needing to be removed, instead of the usual 15 to 30 percent, the number of rinsing baths to obtain the required fastness properties is greatly reduced.
To ensure that AVITERA SE dyes achieve the targeted resource and cost savings, they must be correctly applied. Huntsman Textile Effects works closely with textile mills to adapt their production processes and guarantee excellence in operation, strict cost control and a sustainable system. Helping brands and retailers to coordinate with mills and communicate with consumers improves cooperation throughout the textile value chain, resulting in greater environmental awareness and more sustainable textile processing.
การปฏิวัติอุตสาหกรรมสิ่งทอสินค้าย้อมประหยัด น้ำ
ได้ในครั้งต่อไปคุณลื่นบนโปโล,เสื้อทีมเหย้าจาก lacoste™ หรือเครื่องหมาย& Spencer ' s ,คุณสามารถใช้ความสะดวกสบายในการรู้ว่ากระบวนการที่ใช้ในสีย้อมผ้าเป็นส่วนสำคัญในความยั่งยืนของหนึ่งในของเราอันมีค่าที่สุดดังกล่าวทรัพยากรน้ำ.
ที่โรงงานผลิตที่สองคนนี้แบรนด์เสื้อผ้าซื้อผ้าจากมีการใช้ ผลิตภัณฑ์ การปฏิวัติ avitera™ SE ,สร้างขึ้นโดยนักล่าสัตว์จะลดลงอย่างเห็นได้ชัดการปล่อยก๊าซคาร์บอนไดออกไซด์เป็นอย่างดีเป็นตัวการสำคัญที่ปล่อยก๊าซคาร์บอนไดออกไซด์( CO 2 )การใช้พลังงานและน้ำในระหว่างกระบวนการย้อมและน้ำยาทำความสะอาดที่.
ทำไมจึง เรื่อง
2030 โดยความต้องการในตลาดโลกสำหรับน้ำจะเพิ่มขึ้นร้อยละ 40 การตกแต่งและย้อมสิ่งทอกระบวนการ บริโภค จำนวนมากของน้ำ - เป็นอย่างมากในส่วนของโลกที่ซึ่งเป็นส่วนมากแทบจะไม่เป็นการตระหนักถึงสิ่งแวดล้อมนั้นเพิ่มสูงขึ้นอย่างไม่ความต้องการสำหรับผลิตสิ่งทอในหลากหลายรูปแบบอย่างยั่งยืนแต่ในระดับราคาที่ต่ำ.
ได้มากถึง 26 แกลลอน( 100 ลิตร)ของน้ำเป็นสิ่งจำเป็นในการย้อมเพียงสองปอนด์(หนึ่งกิโลกรัม)ของผ้าฝ้าย การใช้งานพร้อมด้วย avitera™ SE น้ำจะลดลงเพื่อเพียงสามถึงห้าแกลลอน( 15 ถึง 20 ลิตร)ต่อสองปอนด์ของวัสดุ พร้อมด้วยเทคโนโลยีใหม่ที่ย้อมควอทหนึ่ง( 1 )3 ลิตร)ของน้ำต่อคนต่อวันจะได้รับการบันทึกไว้ในประเทศการประมวลผลสิ่งทอในเอเชียที่สำคัญเช่นจีนอินเดียและบังกลาเทศได้.
วิธีการใช้งาน เส้นใย
เซลลูโลสเช่นผ้าลินินผ้าฝ้ายหรือวิสคอสมีใช้อย่างกว้างขวางมากที่สุดเส้นใยสิ่งทอ ทั้งนี้ขึ้นอยู่กับผลผลิตพืชผลและปีที่ประมาณ 30 ล้านตันต่อปีของผ้าฝ้ายได้ถูกผลิตขึ้นมาทุกปีอยู่ไม่ไกลจากส่วนพื้นที่ที่มีขนาดใหญ่ที่สุดของเส้นใยเซลลูโลสคือผ้าฝ้าย บริสุทธิ์ทำจากผ้าฝ้ายย้อมสีนั้นส่วนใหญ่จะเป็นการใช้ในเชิงปฏิกริยาสารสีย้อม.
ที่ย้อมกระบวนการจะดำเนินการในเฟส 3 ที่แตกต่างกัน:
adsorption และแพร่
ที่สร้างสรรค์ในเชิงบวกสีย้อมเป็น adsorbed ลงบนพื้นผิวที่ไม่เรียบและเซลลูโลส diffuses จากนั้นเข้าไปในเส้นใย matrix .
หากเงื่อนไขที่ยึดได้รับความอนุเคราะห์( อุณหภูมิ สูงและ/หรือสูง PH ),สีย้อมคอยตามแก้ปัญหาที่จะตอบสนองพร้อมด้วยสถานที่ใช้งานอยู่ในเซลลูโลสที่ในระหว่างช่วงนี้(ที่ยึด)ทำให้ในพันธบัตร covalent แข็งแกร่ง
ซึ่งจะช่วยในการล้างทำความสะอาดออกจากคุณสมบัติที่มั่นได้รับต้องมีรูปแบบทั้งหมดนี้ของโมเลกุลของสีย้อม adsorbed unfixed จะต้องล้างออกจากไฟเบอร์ที่.ปฏิบัติ
อุตสาหกรรมได้แสดงให้เห็นว่าด้วย avitera SE เกือบร้อยละ 90 ของสีย้อมที่ใช้กับผ้าฝ้ายย้อมในระหว่างเป็นแบบคงที่ไม่เหมือนกับ 60 ถึง 80% ด้วยสารย้อมคอยตามแก้ปัญหาทั่วไป โรงแรมแห่งนี้ให้ความมั่นใจให้ผลตอบแทนสูงกว่า.
ผ้าย้อมสีและสามารถล้างที่มี อุณหภูมิ ที่แตกต่างกันและแตกต่างกันไปของน้ำในปริมาณมาก ระบบย้อมร้อนต้องใช้ อุณหภูมิ ที่ 176 ° F ( 80 ° C )เพื่อทำให้พันธบัตรระหว่างผ้าและวัตถุที่ใช้เป็นสีสำหรับย้อมแบบถาวรระบบซึ่งยังต้องมีการต้มน้ำและยังมีอีกหลายอย่างสมบรูณ์แบบล้างทำความสะอาดแท้งก์อ่างอาบน้ำเพื่อถอด unfixed dyestuffs .
ทั่วไปที่อบอุ่นย้อมแล้วจัดให้บริการระบบได้รับประโยชน์ของการสร้างที่จำเป็นต้องออกพันธบัตรใน อุณหภูมิ ที่ต่ำลง - 140 ° F ( 60 ° C ) - แต่ยังคงต้องมีเป็นจำนวนมากของน้ำและ อุณหภูมิ สูงที่เหมาะสมล้างแบบปิด.
avitera SE สารสีย้อมช่วยให้ลดลงอย่างเห็นได้ชัดน้ำและการใช้พลังงานและความร่วมมือ 2 ตั้งแต่การปล่อยและย้อมที่ล้างทำความสะอาดออกจากกระบวนการไม่เคยมีความยาวเกิน 60 ° C พร้อมด้วยเพียงห้าเปอร์เซ็นต์หรือน้อย unfixed สีย้อมต้องถูกลบออก,แทนที่ตามปกติ 15 ถึง 30% ,จำนวนของล้างอ่างอาบน้ำเพื่อขอรับที่ต้องมีคุณสมบัติเป็นที่มั่นลดลงอย่างมาก.
ในการตรวจสอบให้แน่ใจว่า avitera SE สารสีย้อมการประหยัดต้นทุนและทรัพยากรตามเป้าหมายที่จะต้องนำไปใช้ได้อย่างถูกต้อง นักล่าสัตว์สิ่งทอผลการทำงานอย่างใกล้ชิดกับโรงงานสิ่งทอในการปรับกระบวนการผลิตและการรับประกันถึงความเป็นเลิศในการทำงานการควบคุมต้นทุนอย่างเข้มงวดและระบบที่ยั่งยืนช่วยให้ผู้ค้าปลีกและแบรนด์ในการประสานงานกับโรงงานผลิตและติดต่อสื่อสารกับผู้ใช้ช่วยเพิ่มความร่วมมือตลอดทั่วทั้งพื้นที่ห่วงโซ่การสร้างมูลค่าสิ่งทอส่งผลให้ได้ในการประมวลผลสิ่งทอมากขึ้นอย่างยั่งยืนและรักษาสิ่งแวดล้อมมากขึ้น
การแปล กรุณารอสักครู่..
