4. Conclusions
Using an extraction resin, TEVA, new column chemistry for separating Fe has been developed for Fe isotope ratio determination by MC-ICP-MS. Iron was purified by 6 mol·L−1 HCl + H2O2, and major elements were separated. Fe was finally recovered with 2 mol·L−1 HNO3. The recovery yields and total blanks were 93.5% ± 6.5% (SD) and 6 ng, respectively.
For evaluation of the separation method, Fe isotope ra-tios were measured by a double spike method using MC-ICP-MS, respectively. Repeatability obtained from actual analysis of USGS standard reference materials of BHVO-1, AGV-1, PCC-1, and GSJ standard silicate ma-terials of JB-1, JB-2, JB-3, JA-1, JA-2 and JA-3 were 0.05‰ (SD). Fe isotope ratios of carbonaceous chon-drites of Orgueil, Murchison and Allende were also de-termined by the column chemistries developed in this study.
4. บทสรุปใช้การสกัดยาง TEVA เคมีคอลัมน์ใหม่สำหรับแยก Fe ได้รับการพัฒนาสำหรับการกำหนดอัตราส่วนไอโซโทป โดย MC-ICP-นางสาวเหล็กไม่บริสุทธิ์ โดย 6 mol· FeL−1 HCl + H2O2 และองค์ประกอบสำคัญถูกคั่น Fe ก็ถูกกู้กับ 2 mol·L−1 HNO3 ทำให้การฟื้นตัว และช่องรวมเป็น 93.5 ± 6.5% (SD) และ 6 ng ตามลำดับการประเมินผลของวิธีการแยก Fe ไอโซโทป ra-tios ถูกวัด โดยวิธีสไปค์คู่ใช้ MC-ICP-MS ตามลำดับ ทำซ้ำในที่ได้รับจากการวิเคราะห์จริงวัสดุอ้างอิงมาตรฐาน USGS PCC 1, AGV-1, BHVO 1 และ GSJ ซิลิเคทมาตรฐานม้า-terials เจบี-1, 2 เจบี เจ-3, JA-1, JA-2 และ JA-3 ถูก 0.05‰ (SD) อัตราส่วนไอโซโทป Fe carbonaceous ชลบุรี-drites Orgueil, Murchison และ Allende ยังถูก de-termined โดย chemistries คอลัมน์ที่ได้รับการพัฒนาในการศึกษานี้
การแปล กรุณารอสักครู่..
4. Conclusions
Using an extraction resin, TEVA, new column chemistry for separating Fe has been developed for Fe isotope ratio determination by MC-ICP-MS. Iron was purified by 6 mol·L−1 HCl + H2O2, and major elements were separated. Fe was finally recovered with 2 mol·L−1 HNO3. The recovery yields and total blanks were 93.5% ± 6.5% (SD) and 6 ng, respectively.
For evaluation of the separation method, Fe isotope ra-tios were measured by a double spike method using MC-ICP-MS, respectively. Repeatability obtained from actual analysis of USGS standard reference materials of BHVO-1, AGV-1, PCC-1, and GSJ standard silicate ma-terials of JB-1, JB-2, JB-3, JA-1, JA-2 and JA-3 were 0.05‰ (SD). Fe isotope ratios of carbonaceous chon-drites of Orgueil, Murchison and Allende were also de-termined by the column chemistries developed in this study.
การแปล กรุณารอสักครู่..
4 . สรุป
โดยใช้การสกัดเรซิน , เทวา , เคมีคอลัมน์ใหม่เพื่อแยกเหล็กได้รับการพัฒนา , การกำหนดอัตราส่วนของไอโซโทปโดย mc-icp-ms. เหล็กบริสุทธิ์ 6 โมล ด้วย L − 1 HCl H2O2 , และองค์ประกอบหลักที่ต้องแยกจากกัน เฟก็หายด้วย 2 mol ด้วย L − 1 ( กรดดินประสิว ) . การฟื้นตัวของผลผลิตและช่องว่างทั้งหมดเป็น 93.5% ± 6.5% ( SD ) และ 6
ng ตามลำดับสำหรับการประเมินผลของการแยกไอโซโทป ราเฟ tios วิธีการวัดจากคู่ชั่วคราวโดยใช้ mc-icp-ms ตามลำดับ การที่ได้จากการวิเคราะห์ที่เกิดขึ้นจริงของข้อมูลอ้างอิงมาตรฐานวัสดุของ bhvo-1 agv-1 pcc-1 , , , และ gsj มาตรฐานซิลิเกต terials ma ของ jb-1 jb-2 jb-3 ja-1 , , , , และ ja-2 ja-3 เป็น 0.05 ‰ ( SD ) อัตราส่วนไอโซโทปของเหล็กที่ประกอบด้วยคาร์บอน drites ของ orgueil ชลบุรี ,และยัง termined de Allende ที่กระจายโดยคอลัมน์เคมีที่พัฒนาขึ้นในการศึกษานี้
การแปล กรุณารอสักครู่..