Product name: Goldstar Premium Plate Developer
Product code: 5293535
Supplier: KODAK LIMITED, Hemel One, Boundary Way, Hemel Hempstead, HP2 7YU, Great Britain
IN EMERGENCY, telephone: 0870-2430270. Available during office hours only.
For further information about this product, telephone 0870-2430270 or email kes@kodak.com.
Synonyms: F1722
Product Use: photographic processing chemical (developer/activator), For industrial use only.
2. Hazards identification
This Safety Data Sheet conforms to REACH Regulation (EC) 1907/2006.
Product: Irritant. Irritating to eyes and skin.
4. First aid measures
Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms occur.
Eyes: In case of contact with eyes, flush immediately with plenty of water and seek medical attention.
Skin: Immediately flush with plenty of water for at least 15 minutes and wash using soap. Get medical attention
if symptoms occur.
Ingestion: Do NOT induce vomiting. Give victim a glass of water. Get medical attention immediately. Never
give anything by mouth to an unconscious person.
5. Fire-fighting measures
Extinguishing Media: The product is not flammable. Use appropriate agent for adjacent fire.
Special Fire-Fighting Procedures: No special fire fighting procedure is necessary.
Hazardous Combustion Products: None.
6. Accidental release measures
Personal precautions: See Section 8 for recommendations on the use of personal protective equipment.
Environmental precautions: Prevent spillage from entering drains. Absorb spill with vermiculite or other inert
absorbant material such as sand or earth, then place in a suitable container for proper disposal. Clean surface
thoroughly with water to remove residual contamination.
Waste disposal: Contaminated absorbent should be disposed of in accordance with local regulations.
7. Handling and storage
Personal precautions: Avoid breathing mist or vapour. Avoid contact with eyes, skin, and clothing. Wash
thoroughly after handling. Use with adequate ventilation.
Prevention of Fire and Explosion: No special precautionary measures should be needed under anticipated
conditions of use.
Storage: Cool conditions (5 - 30°C). Keep container tightly closed. Keep away from incompatible substances
(see Incompatibility section.)
Ventilation: Match ventilation rates to conditions of use so as not to exceed any applicable exposure limits (see
Section 8). Good general ventilation of 10 or more room volumes per hour in the work area is recommended.
8. Exposure controls/personal protection
Occupational exposure controls: Not established
Ventilation: Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under local
exhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions.
Respiratory protection: None should be needed under normal conditions of use.
Eye protection: Wear safety glasses with side shields or protective goggles whenever mixing or handling
solutions.
Skin and body protection: Using the information provided in Section 2, seek the advice of the glove supplier
as to the most suitable glove material. Avoid skin contact when mixing or handling the substance/preparation or
a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.
Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact:
Material Thickness Breakthrough time
Nitrile rubber >= 0.38 mm > 480 min
Neoprene >= 0.65 mm > 240 min
butyl-rubber >= 0.36 mm > 480 min
The protective gloves to be used must comply with the specifications of the EC directive 89/686/EEC and the
resultant standard EN 374. This recommendation applies only to the product stated in the Safety Data Sheet
and supplied by us as well as to the purpose specified by us.
Recommended Decontamination Facilities: Safety shower, eye wash, washing facilities as appropriate to
condition of use.
9. Physical and chemical properties
Physical form: liquid
Colour: colourless
Odour: slight
Specific gravity: 1.0780
Vapour pressure: 24 mbar (18.0 mm Hg)
Vapour density: 0.6
Volatile fraction by weight: 90 - 95 %
Boiling point/boiling range: no data available
Water solubility: soluble
pH: 12.8 - 13.1
Flash point: does not flash
ชื่อสินค้า: แผ่น Goldstar พรีเมี่ยมสำหรับนักพัฒนารหัสสินค้า: 5293535จำหน่าย: KODAK จำกัด Hemel ขอบทาง โรงแรม HP2 7YU สหราชอาณาจักรในกรณีฉุกเฉิน โทรศัพท์: 0870-2430270 พร้อมใช้งานในเวลาทำการเท่านั้นสำหรับข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้ โทรศัพท์ 0870-2430270 หรืออีเมล์ kes@kodak.comชื่อพ้อง: F1722การใช้ผลิตภัณฑ์: สารเคมีการประมวลผลภาพถ่าย (พัฒนา/activator), สำหรับอุตสาหกรรมใช้เท่านั้น2. อันตรายรหัสเอกสารข้อมูลความปลอดภัยนี้สอดคล้องไปถึงระเบียบ (EC) 1907/2006ผลิตภัณฑ์: ระคายเคือง ระคายเคืองตาและผิวกาย4. มาตรการปฐมพยาบาลสูดดม: ถ้าอาการ ย้ายไปที่อากาศบริสุทธิ์ ได้รับความสนใจทางการแพทย์ถ้าอาการเกิดขึ้นตา: ในกรณีสายตา ล้าง ด้วยน้ำจำนวนมากทันที และรีบไปพบแพทย์ผิวหนัง: ล้าง ด้วยน้ำปริมาณมากอย่างน้อย 15 นาที และล้างใช้สบู่ทันที ได้รับการรักษาพยาบาลถ้าอาการเกิดขึ้นบริโภค: ทำให้อาเจียน ให้เหยื่อแก้วน้ำ ได้รับการรักษาพยาบาลทันที ไม่เคยให้อะไรทางปากผู้หมดสติ5. โฟมดับเพลิงเพลิง: ผลิตภัณฑ์ไม่ได้ไวไฟ ใช้ตัวแทนที่เหมาะสมสำหรับติดไฟขั้นตอนการดับไฟพิเศษ: ไฟพิเศษขั้นตอนการจำเป็นผลิตภัณฑ์เผาไหม้อันตราย: ไม่มี6 แตข้อควรระวังส่วนบุคคล: ดูมาตรา 8 สำหรับการแนะนำในการใช้ของอุปกรณ์ป้องกันส่วนบุคคลEnvironmental precautions: Prevent spillage from entering drains. Absorb spill with vermiculite or other inertabsorbant material such as sand or earth, then place in a suitable container for proper disposal. Clean surfacethoroughly with water to remove residual contamination.Waste disposal: Contaminated absorbent should be disposed of in accordance with local regulations. 7. Handling and storagePersonal precautions: Avoid breathing mist or vapour. Avoid contact with eyes, skin, and clothing. Washthoroughly after handling. Use with adequate ventilation.Prevention of Fire and Explosion: No special precautionary measures should be needed under anticipatedconditions of use.Storage: Cool conditions (5 - 30°C). Keep container tightly closed. Keep away from incompatible substances(see Incompatibility section.)Ventilation: Match ventilation rates to conditions of use so as not to exceed any applicable exposure limits (seeSection 8). Good general ventilation of 10 or more room volumes per hour in the work area is recommended. 8. Exposure controls/personal protectionOccupational exposure controls: Not establishedVentilation: Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under localexhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions.Respiratory protection: None should be needed under normal conditions of use.Eye protection: Wear safety glasses with side shields or protective goggles whenever mixing or handling
solutions.
Skin and body protection: Using the information provided in Section 2, seek the advice of the glove supplier
as to the most suitable glove material. Avoid skin contact when mixing or handling the substance/preparation or
a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.
Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact:
Material Thickness Breakthrough time
Nitrile rubber >= 0.38 mm > 480 min
Neoprene >= 0.65 mm > 240 min
butyl-rubber >= 0.36 mm > 480 min
The protective gloves to be used must comply with the specifications of the EC directive 89/686/EEC and the
resultant standard EN 374. This recommendation applies only to the product stated in the Safety Data Sheet
and supplied by us as well as to the purpose specified by us.
Recommended Decontamination Facilities: Safety shower, eye wash, washing facilities as appropriate to
condition of use.
9. Physical and chemical properties
Physical form: liquid
Colour: colourless
Odour: slight
Specific gravity: 1.0780
Vapour pressure: 24 mbar (18.0 mm Hg)
Vapour density: 0.6
Volatile fraction by weight: 90 - 95 %
Boiling point/boiling range: no data available
Water solubility: soluble
pH: 12.8 - 13.1
Flash point: does not flash
การแปล กรุณารอสักครู่..