the no-slip condition, and the thin boundary layer in which the viscous
effects are significant near the plate surface is the viscous flow region. The
region of flow on both sides away from the plate and unaffected by the
presence of the plate is the inviscid flow region.
Internal versus External Flow
A fluid flow is classified as being internal or external, depending on
whether the fluid is forced to flow in a confined channel or over a surface.
The flow of an unbounded fluid over a surface such as a plate, a wire, or a
pipe is external flow. The flow in a pipe or duct is internal flow if the fluid
is completely bounded by solid surfaces. Water flow in a pipe, for example,
is internal flow, and airflow over a ball or over an exposed pipe during a
windy day is external flow (Fig. 1–16). The flow of liquids in a duct is
called open-channel flow if the duct is only partially filled with the liquid
and there is a free surface. The flows of water in rivers and irrigation
ditches are examples of such flows.
Internal flows are dominated by the influence of viscosity throughout the
flow field. In external flows the viscous effects are limited to boundary layers
near solid surfaces and to wake regions downstream of bodies.
Compressible versus Incompressible Flow
A flow is classified as being compressible or incompressible, depending on
the level of variation of density during flow. Incompressibility is an approximation,
and a flow is said to be incompressible if the density remains
nearly constant throughout. Therefore, the volume of every portion of fluid
remains unchanged over the course of its motion when the flow (or the
fluid) is incompressible.
The densities of liquids are essentially constant, and thus the flow of liquids
is typically incompressible. Therefore, liquids are usually referred to as
incompressible substances. A pressure of 210 atm, for example, causes the
density of liquid water at 1 atm to change by just 1 percent. Gases, on the
other hand, are highly compressible. A pressure change of just 0.01 atm, for
example, causes a change of 1 percent in the density of atmospheric air.
When analyzing rockets, spacecraft, and other systems that involve highspeed
gas flows, the flow speed is often expressed in terms of the dimensionless
Mach number defined as
เงื่อนไขไม่มีการจัดส่ง และบางขอบเขตชั้นในซึ่งจะข้นลักษณะพิเศษสำคัญใกล้แผ่นพื้นที่เป็นพื้นที่ที่กระแสความหนืด ที่ภูมิภาคของไหลทั้งสองด้าน จากแผ่น และไม่ถูกกระทบโดยการของจานเป็นภูมิภาค inviscid กระแสภายในเทียบกับกระแสภายนอกกระแสของเหลวถูกจัดประเภทเป็นการภายใน หรือภาย นอก ขึ้นอยู่กับว่าน้ำมันถูกบังคับให้ไหล ในช่องจำกัด หรือพื้นผิวการไหลของเหลวการงที่ผ่านพื้นผิวเช่นจาน ลวด หรือท่อเป็นกระแสภายนอก การไหลในท่อหรือท่ออยู่ภายในกระแสน้ำทั้งหมดถูกล้อมรอบ ด้วยพื้นผิวของแข็ง น้ำไหลในท่อ เช่นเป็นขั้นตอนภายใน และการไหลของอากาศ ผ่านลูก หรือ ผ่านท่อการสัมผัสระหว่างคำวันวินดี้เป็นกระแสภายนอก (Fig. 1-16) เป็นการไหลของของเหลวในท่อเป็นเรียกว่าเปิดช่องไหลถ้าท่อเพียงบางส่วนเต็มไป ด้วยของเหลวและมีพื้นผิวฟรี กระแสน้ำในแม่น้ำและการชลประทานคูเป็นตัวอย่างของกระแสดังกล่าวขั้นตอนภายในถูกครอบงำ โดยอิทธิพลของความหนืดตลอดการฟิลด์การรับส่ง ในขั้นตอนภายนอก ลักษณะข้นจะจำกัดขอบเขตของชั้นใกล้พื้นผิวของแข็ง และปลุกภาคน้ำของร่างกายอัดตัวได้เมื่อเทียบกับกระแส Incompressibleขั้นตอนถูกจัดประเภทเป็น การอัดตัวได้ incompressible ขึ้นอยู่กับระดับของการเปลี่ยนแปลงของความหนาแน่นระหว่างกระแส Incompressibility เป็นราคาประมาณการand a flow is said to be incompressible if the density remainsnearly constant throughout. Therefore, the volume of every portion of fluidremains unchanged over the course of its motion when the flow (or thefluid) is incompressible.The densities of liquids are essentially constant, and thus the flow of liquidsis typically incompressible. Therefore, liquids are usually referred to asincompressible substances. A pressure of 210 atm, for example, causes thedensity of liquid water at 1 atm to change by just 1 percent. Gases, on theother hand, are highly compressible. A pressure change of just 0.01 atm, forexample, causes a change of 1 percent in the density of atmospheric air.When analyzing rockets, spacecraft, and other systems that involve highspeedgas flows, the flow speed is often expressed in terms of the dimensionlessMach number defined as
การแปล กรุณารอสักครู่..