. Experimental
Lyophilized bovine serum albumin (BSA), sulphosalicylic acid (SSA) and other reagents of analytical grade, were obtained from POCh (Poland). For all experiments doubly distilled water was used throughout. Samples of cerebrospinal fluid with known levels of total protein in pathological and physiological ranges were obtained from the Central Clinical Laboratory of Medical University of Warsaw. The samples were analyzed in clinical settings using a routine Exton precipitation method with turbidimetric detection [16] and [17]. These reference determinations were performed using quartz cuvettes from Optiglass Ltd. (England) and spectrophotometer (Helios Delta, Thermo Scientific, USA)
Light emitting diodes (LEDs) of 565 nm, 600 nm, 630 nm and 650 nm wavelengths used in these investigations were obtained from Optosupply (Hong Kong). These LEDs have common shape, 5 mm diameter, transparent lens, and 20 nm declared full width at half-maximum. For turbidimetric measurements a 565 nm LED-emitter and a 600 nm LED-detector were applied. In the nephelometric configuration two 630 nm LED-emitters and 650 nm LED-detector were used. The optical flow-through cell of 60 μL internal volume integrated with respective LEDs made of PEEK (PolyEther Ether Ketone) material that is resistant on acidic solutions. The cross-section of the detector is shown in Fig. 1. The detailed video tutorial illustrating step-by-step the procedure of mechanical fabrication of very similar compact flow-through detector for fluorimetric measurements is shown elsewhere [18] as a Supplementary material.
. ทดลองLyophilized วัว albumin ในซีรั่ม (บีเอสเอ), กรด sulphosalicylic (SSA) และอื่น ๆ reagents เกรดวิเคราะห์ ได้รับจาก POCh (โปแลนด์) สำหรับการทดลองทั้งหมด ถูกใช้น้ำกลั่นสองเหตุการณ์ตลอด ตัวอย่างของไขสันหลัง ด้วยรู้จักกันระดับของโปรตีนรวมในช่วงทางพยาธิวิทยา และสรีรวิทยาได้รับจากเซ็นทรัลคลินิกปฏิบัติของแพทย์มหาวิทยาลัยของวอร์ซอว์ มีวิเคราะห์ตัวอย่างในการตั้งค่าทางคลินิกโดยใช้ขั้นตอนวิธีฝน Exton กับ turbidimetric ตรวจสอบ [16] [17] Determinations อ้างอิงเหล่านี้ถูกดำเนินการโดยใช้ควอตซ์ cuvettes Optiglass จำกัด (อังกฤษ) และเครื่องทดสอบกรดด่าง (เฮลิออสเดลต้า เทอร์โมวิทยาศาสตร์ สหรัฐอเมริกา)Light emitting diodes (LEDs) of 565 nm, 600 nm, 630 nm and 650 nm wavelengths used in these investigations were obtained from Optosupply (Hong Kong). These LEDs have common shape, 5 mm diameter, transparent lens, and 20 nm declared full width at half-maximum. For turbidimetric measurements a 565 nm LED-emitter and a 600 nm LED-detector were applied. In the nephelometric configuration two 630 nm LED-emitters and 650 nm LED-detector were used. The optical flow-through cell of 60 μL internal volume integrated with respective LEDs made of PEEK (PolyEther Ether Ketone) material that is resistant on acidic solutions. The cross-section of the detector is shown in Fig. 1. The detailed video tutorial illustrating step-by-step the procedure of mechanical fabrication of very similar compact flow-through detector for fluorimetric measurements is shown elsewhere [18] as a Supplementary material.
การแปล กรุณารอสักครู่..
