Introduction
Serious concern for cleaner environment along with increasingly
stringent regulations concerning emissions from all kinds of
propulsion and power systems have motivated combustion engineers
to develop novel combustion techniques for achieving low
levels of pollutants emission (such as, NOx, CO, unburned hydrocarbons
and soot) from gas turbine combustors. The thermal field
uniformity in gas turbine combustors is far from adequate as the
combustors burn locally to cause extensive downtimes of the system
and increased emission of NOx. Colorless distributed combustion
(CDC), which shares some of the same principles of high
temperature air combustion (HiTAC) [1], has been shown to provide
favorable options to reduce emissions of NOx and CO, and improve
pattern factor (thermal field uniformity) in the combustor,
stable combustion and low noise emission for gas turbine combustion
application. The flames in distributed combustion do not show
any visible flame signatures so that the flame so formed is termed
colorless due to negligible visible emission from the flames as compared
to conventional flames.
In conventional gas turbine combustors, swirlers are widely
used so that the flow entering the combustor has not only axial
component of velocity but also tangential and radial velocity. Swirl
provides hot gas recirculation zone for better mixing of the reactants,
increased residence of the reactants in the toroidal recirculation
zone of the combustor with the subsequent result of compact
flame and enhanced flame stability limits over a wide range of
operating conditions [2]. A recirculation zone is created downstream
of the swirler, wherein the flow reversal results in mixing
of hot product gases with the incoming fresh stream. This provides
high and uniform temperatures in the combustion zone in the form
of a well stirred reactor. This hot mixture provides the ignition energy
for the fuel to ignite and stabilize the flame. In premixed condition,
the reaction zone is stabilized in the region of interaction
between the product gases and the fresh stream, and is often a very
thin reaction zone of the order of a millimeter. However, in nonpremixed
condition, fuel is injected in shear region formed near
to the zero stream line boundary and recirculation region which
provides the low velocity region for flame stabilization with the
evolution of high temperatures from the flame. For flames operating
in diffusion mode, the reaction zone is stabilized to result in
large temperature gradients and hot-spot regions in the entire
combustion chamber that result in high NOx levels [3] from the
combustion of fuels.
แนะนำกังวลอย่างรุนแรงสำหรับสภาพแวดล้อมสะอาดพร้อมมากขึ้นกฎระเบียบเข้มงวดเกี่ยวกับการปล่อยก๊าซเรือนกระจกจากทุกชนิดของระบบขับเคลื่อนและพลังงานมีวิศวกรเผาไหม้แรงจูงใจการพัฒนาเทคนิคการเผาไหม้นวนิยายสำหรับการบรรลุเป้าหมายต่ำระดับของมลพิษสารมลพิษ (เช่น โรงแรมน็อกซ์ CO สารไฮโดรคาร์บอนที่เผาไหม้และฟุ้ง) จากกังหันก๊าซ combustors ฟิลด์ความร้อนความรื่นรมย์ในกังหันก๊าซ combustors อยู่ห่างพอเป็นcombustors เครื่องเขียนทำ downtimes อย่างละเอียดของระบบและมลพิษที่เพิ่มขึ้นของโรงแรมน็อกซ์ เผาไหม้กระจายไม่มีสี(CDC), ซึ่งใช้หลักการเดียวกันสูงอุณหภูมิอากาศเผาไหม้ (HiTAC) [1], ได้รับการแสดงเพื่อให้ตัวเลือกที่ดีเพื่อลดการปล่อย CO และโรงแรมน็อกซ์ และปรับปรุงรูปแบบปัจจัย (ฟิลด์ความร้อนใจ) ใน combustorเผาไหม้มีความมั่นคงและเสียงรบกวนต่ำมลพิษสำหรับกังหันก๊าซสันดาปแอพลิเคชัน เปลวไฟในการเผาไหม้กระจายไม่ต้องแสดงลายเซ็นที่มองเห็นเปลวไฟใด ๆ ให้เกิดเปลวไฟเรียกว่าไม่มีสีเนื่องจากมลพิษระยะมองเห็นได้จากเปลวไฟเป็นการเปรียบเทียบเปลวไฟธรรมดาถึงในกังหันก๊าซแบบเดิม combustors, swirlers มีอย่างกว้างขวางใช้เพื่อให้ขั้นตอนการป้อน combustor จะมีเฉพาะแกนส่วนประกอบของความเร็วความเร็ว tangential และรัศมี หมุนให้แก๊สร้อน recirculation โซนผสม reactants ดีเรสซิเดนซ์เพิ่มของ reactants ใน toroidal recirculationzone of the combustor with the subsequent result of compactflame and enhanced flame stability limits over a wide range ofoperating conditions [2]. A recirculation zone is created downstreamof the swirler, wherein the flow reversal results in mixingof hot product gases with the incoming fresh stream. This provideshigh and uniform temperatures in the combustion zone in the formof a well stirred reactor. This hot mixture provides the ignition energyfor the fuel to ignite and stabilize the flame. In premixed condition,the reaction zone is stabilized in the region of interactionbetween the product gases and the fresh stream, and is often a verythin reaction zone of the order of a millimeter. However, in nonpremixedcondition, fuel is injected in shear region formed nearto the zero stream line boundary and recirculation region whichprovides the low velocity region for flame stabilization with theevolution of high temperatures from the flame. For flames operatingin diffusion mode, the reaction zone is stabilized to result inlarge temperature gradients and hot-spot regions in the entirecombustion chamber that result in high NOx levels [3] from thecombustion of fuels.
การแปล กรุณารอสักครู่..
