The new antenna prototype was mounted at different
positions on various TV sets. One of the optimum
configurations is shown in Fig.13 where the new antenna is
mounted on one of the upper corners of the display rim. In this
configuration, the new antenna has a minimum blockage by
the TV set housing. This unique configuration is feasible with
all TV sets because the widths of the new antenna can always
be made narrower than the width of the display rim of any TVset. Furthermore, the new antenna is made of a flexible
material. Therefore, it is easy to fold around the 90o
corners of
the display rim. Moreover, the new antenna can be mounted
anywhere because it does not use a part of the TV set as an
extended ground plane as usually happens with internal
antennas.