A Nicolet iS5 FTIR Spectrometer (Thermo Scientific, Madison,
WI, USA) equipped with a detector of deuterated triglycine sulfate
(DTGS) and connected to the software of an OMNIC operating system
(Version 9.0, Thermo Scientific, Madison, WI, USA) was used to
obtain FTIR spectra of oils. Drops of oil samples were covered on
the surface in contact with attenuated total reflectance (ATR) on
a multibounce plate of ZnSe crystal at a controlled ambient temperature
(25 C). FTIR spectra were collected in the frequency
range of 4000–650 cm1 by co-adding 64 scans at a resolution of
4 cm1 with strong apodization. All spectra were background corrected
using an air spectrum, which was renewed after each scan.
The plate was carefully cleaned twice by hexane followed by acetone
and dried with soft tissue before filling in with next sample.
The spectra were recorded as absorbance values at each data point
in triplicates, and the results were reported as mean values.
เป็น nicolet is5 FTIR Spectrometer ( เทอร์โมวิทยาศาสตร์ , Madison ,
WI , USA ) พร้อมตรวจจับของ deuterated triglycine ซัลเฟต
( dtgs ) และเชื่อมต่อกับซอฟต์แวร์ของระบบปฏิบัติการ omnic
( รุ่น 9.0 , เทอร์โมวิทยาศาสตร์ , Madison , WI , USA ) ใช้
ขอรับ FTIR สเปกตรัมของตัวขับ หยดตัวอย่างน้ำมันถูกปกคลุมบน
พื้นผิวสัมผัสกับการสะท้อนการรวม ( ATR )
เป็น multibounce จานติคริสตัลที่ควบคุมอุณหภูมิ
( 25 C ) FTIR spectra เชิงความถี่
ช่วง 4000 – 650 cm 1 โดย Co เพิ่ม 64 สแกนที่ความละเอียดของ
4 ซม. 1 กับอะโพไดเซชันที่แข็งแกร่ง ทั้งหมดนี้คือพื้นหลังแก้ไข
ใช้อากาศสเปกตรัมซึ่งได้รับการต่ออายุหลังจากที่แต่ละสแกน
จานอย่างระมัดระวัง ทำความสะอาดสองครั้งตามด้วยอะซิโตน
เฮกเซนและอบแห้งด้วยเนื้อเยื่ออ่อนก่อนที่จะกรอกในหน้าตัวอย่าง .
สเปกตรัมบันทึกเป็นค่าการดูดกลืนแสงในแต่ละจุดข้อมูล
3 ซ้ำ และผลลัพธ์ที่ได้รายงานเป็นค่าเฉลี่ยค่า
การแปล กรุณารอสักครู่..
