GCeMS analysis were performed using a Hewlett-Packard 6890 chromatograph (Wilmington, DE, USA) equipped
with a 5973 mass selective detector and a HP-5 MS (60 m 0.25 mm, 0.25 mmfilm thickness) capillary column.
The temperature program for the GC was as follows : initial temperature 75 C, 10 C/min ramp to 190 C, then 20 C/min to 280 C, held for 5 min. The injector temperature was maintained at 300 C and operated in splitless injection mode with the valve closed for 1 min. Helium (99.9999% pure, Carburos Meta´licos, Zaragoza, Spain) was used as the carrier gas at a constant flow of 1 mL per min.
The interface temperature was 280 Cand the ionization mode was electron impact (70 eV).
The mass selective detector was exposed to the sample for 5 min. After exposure, the drop was retracted again into the syringe and then, it was transferred to the injection port of a GCeMS system
การวิเคราะห์ GCeMS ถูกดำเนินการโดยใช้ Hewlett-Packard 6890 Chromatograph (Wilmington, DE, USA) พร้อม
กับ 5973 เครื่องตรวจจับการคัดเลือกมวลและ HP-5 MS (60 เมตร? 0.25 มมความหนา 0.25 mmfilm) คอลัมน์ฝอย
โปรแกรมอุณหภูมิสำหรับ GC เป็นดังต่อไปนี้อุณหภูมิเริ่มต้น 75 C, 10 C / นาทีทางลาดถึง 190 C แล้ว 20 C / นาทีถึง 280 C, จัดขึ้นเป็นเวลา 5 นาที?? อุณหภูมิหัวฉีดที่ได้รับการเก็บรักษาไว้ที่ 300 องศาเซลเซียสและดำเนินการในโหมดการฉีด Splitless พร้อมวาล์วปิดเวลา 1 นาที ฮีเลียม (99.9999% บริสุทธิ์ Carburos Meta'licos, ซาราโกซา, สเปน) ถูกใช้เป็นที่บรรทุกก๊าซไวไฟที่ไหลคงที่ของ 1 มิลลิลิตรต่อนาที
อุณหภูมิอินเตอร์เฟซที่เป็น 280? ลูกอมโหมดไอออนไนซ์เป็นผลกระทบอิเล็กตรอน (70 eV)
มวลเลือกตรวจจับได้สัมผัสกับตัวอย่างเวลา 5 นาที หลังจากได้รับลดลงได้รับการหดอีกครั้งในเข็มฉีดยาและจากนั้นมันก็ถูกย้ายไปยังพอร์ตการฉีดของระบบ GCeMS
การแปล กรุณารอสักครู่..
