An active mixed-mode, cross flow solar
dryer for paddy with a semi-continuous discharging
system was designed, fabricated and
evaluated in Agricultural Engineering department,
Shiraz University, Iran. The system consists
of: six solar air heaters, a dryer, a heating
channel, a blower and air connecting ducts
[9,10]
Six simple flat plate solar air heaters, each
2 m2 surface area, were used to warm up the air.
The incident solar radiation was measured with
a Kipp-Zonen solarimeter connected to a monitoring
recording system [11].. An auxiliary
electric heating channel with maximum output
of 6 kW was designed and incorporated
between the dryer and the solar air heaters with which a constant inlet air temperatures were
maintained during the experiments regardless
of the weather conditions. The inlet air temperature
to the dryer plenum chamber was controlled
thermostatically (± 1.5°C).Whenever
the air heaters were not able to warm up the air
to a desired temperature, the heating channel
was switched on automatically until the desired
air temperature was maintained. The controlling
thermostat was hanged on a proper place
inside the dryer plenum chamber. A centrifugal
blower was used to provide the required air
flow to the drying system. The air mass flow
rate can be varied by installing a damper within
the delivery air flow duct to the plenum chamber.
The air mass flow rate was measured by a
D and D/2 tapping orifice plate incorporated
into the delivery duct just before the plenum
chamber using Eq. (1), [12].
An active mixed-mode, cross flow solardryer for paddy with a semi-continuous dischargingsystem was designed, fabricated andevaluated in Agricultural Engineering department,Shiraz University, Iran. The system consistsof: six solar air heaters, a dryer, a heatingchannel, a blower and air connecting ducts[9,10]Six simple flat plate solar air heaters, each2 m2 surface area, were used to warm up the air.The incident solar radiation was measured witha Kipp-Zonen solarimeter connected to a monitoringrecording system [11].. An auxiliaryelectric heating channel with maximum outputof 6 kW was designed and incorporatedbetween the dryer and the solar air heaters with which a constant inlet air temperatures weremaintained during the experiments regardlessof the weather conditions. The inlet air temperatureto the dryer plenum chamber was controlledthermostatically (± 1.5°C).Wheneverthe air heaters were not able to warm up the airto a desired temperature, the heating channelwas switched on automatically until the desiredair temperature was maintained. The controllingthermostat was hanged on a proper placeinside the dryer plenum chamber. A centrifugalblower was used to provide the required airflow to the drying system. The air mass flowrate can be varied by installing a damper withinthe delivery air flow duct to the plenum chamber.The air mass flow rate was measured by aD and D/2 tapping orifice plate incorporatedเป็นท่อส่งก่อน plenumหอที่ใช้ Eq. (1), [12]
การแปล กรุณารอสักครู่..

โหมดการผสมใช้งานข้ามไหลข้าวเปลือกด้วยเครื่องอบแห้งพลังงานแสงอาทิตย์
ปล่อยกึ่งต่อเนื่องระบบถูกออกแบบ , ประดิษฐ์และ
ประเมินผลแผนกวิศวกรรมเกษตร
Shiraz University , อิหร่าน ระบบประกอบด้วย 6
: พลังงานแสงอาทิตย์อากาศอุ่น , เครื่องเป่า , ช่องทางร้อน
, เป่าและเครื่องเชื่อมท่อ
[ ]
9,10 หกง่ายแบนแผ่นพลังงานแสงอาทิตย์อากาศ heaters แต่ละ
2 ตารางเมตร พื้นที่ผิวใช้อุ่นอากาศ .
เหตุการณ์รังสีวัดด้วย
A หน้าโซเน็นโซลาริมิเตอร์ที่เชื่อมต่อกับระบบบันทึกการติดตาม
[ 11 ] . . . . . . . เสริมความร้อนไฟฟ้าด้วย
ช่อง output สูงสุด 6 กิโลวัตต์ ถูกออกแบบและรวม
ระหว่างเครื่องเป่าและเครื่องทำความร้อนพลังงานแสงอาทิตย์อากาศที่คงที่อุณหภูมิอากาศเข้าได้
รักษาในระหว่างการทดลอง ไม่ว่าของสภาพอากาศ อุณหภูมิลมร้อน
ไปห้องควบคุมอุณหภูมิเครื่องเป่า Plenum
( ± 1.5 ° C ) เมื่อใดก็ตามที่
อากาศเครื่องยังไม่ สามารถอุ่นอากาศ
ถึงอุณหภูมิที่ต้องการ , ช่องความร้อน
ถูกเปิดโดยอัตโนมัติ จนต้องการ
อุณหภูมิอากาศถูกเก็บรักษาไว้ การควบคุมอุณหภูมิ ถูกแขวนคอบน
ภายในเหมาะสมสถานที่แห้ง Plenum Chamberเป็นพัดลมแรงเหวี่ยง
ถูกใช้เพื่อให้อากาศที่ต้อง
ไหลในระบบอบแห้ง . การไหลของอากาศ ซึ่งสามารถปรับเปลี่ยนได้โดยการติดตั้ง
จัดส่งไหลชื้นภายในท่ออากาศเข้าห้อง PLENUM .
อัตราการไหลของอากาศ วัดด้วย
D และ D / 2 เคาะแผ่นปากเป็นท่อรวม
ส่งก่อนที่ห้อง PLENUM
ใช้อีคิว ( 1 ) [ 12 ]
การแปล กรุณารอสักครู่..
