The Discrete Element Method (DEM) is a numerical tool
for modelling granular flows at the grain level. It is showing
great promise as an optimisation tool for a variety of industries
dealingwith granular materials [4]. At each computation
timestep, the DEM tracks all unit particles in the system, and
calculates the forces between particles and between particles
and boundaries. For each collision, a contact force model
is applied. A variety of different contact models of varying
complexity are available [5,6] but it is not a priori obvious
that a more complex (and more computationally expensive)
force model is necessary at the particulate level in order to
correctly predict flows of very large assemblies of particles.
We use a DEM solver developed by CSIRO that has been
applied successfully to granular flows in mining [7,8], bulk
solids handling [9,10], geophysical [11] and pharmaceuticals
[12] applications. A linear spring is used to model elastic
loading of the particles, and a dashpot models the energy
dissipated in inelastic collisions. This contact model simplifies
the computation allowing for large numbers of particles
(107) to be realistically modelled.
To facilitate the simulations presented, an infinitely stiff
path was created in the DEM software. Attached to this path
was a ‘bucket’ object constrained to rotate about a horizontal
axis parallel to the axis of the head pulley. The buckets rotation
is controlled by a pair of spring contacts. The springs
are arbitrarily positioned 10 mm above and 10 mm below the
วิธีการองค์ประกอบที่ไม่ต่อเนื่อง (พวกเขา) เป็นเครื่องมือ
ตัวเลขสำหรับการสร้างแบบจำลองการไหลของเม็ดที่ระดับเม็ด จะแสดง
สัญญาที่ดีเป็นเครื่องมือในการเพิ่มประสิทธิภาพสำหรับความหลากหลายของอุตสาหกรรม
dealingwith วัสดุเม็ด [4] ที่คำนวณแต่ละ
timestep, พวกเขาติดตามอนุภาคทุกหน่วยในระบบและ
คำนวณกองกำลังระหว่างอนุภาคและอนุภาคระหว่าง
และขอบเขต สำหรับการปะทะกันแต่ละติดต่อแรง
แบบถูกนำมาใช้ ความหลากหลายของรูปแบบที่แตกต่างกันของรายชื่อผู้ติดต่อที่แตกต่างกัน
ซับซ้อนมี [5,6] แต่มันไม่ได้เป็นนิรนัย
เห็นได้ชัดว่ามีความซับซ้อนมากขึ้น (และราคาแพงกว่าคอมพิวเตอร์)
แบบแรงเป็นสิ่งที่จำเป็นในระดับอนุภาคเพื่อทำนายได้อย่างถูกต้อง
กระแสของการประกอบขนาดใหญ่มากของอนุภาค.
เราใช้แก้พวกเขาพัฒนาโดย CSIRO ที่ได้รับ
นำไปใช้กับกระแสเม็ดในการทำเหมืองแร่ [7,8],
การจัดการขยะของแข็ง [9,10], ฟิสิกส์ [11] และยา
[12] การใช้งาน สปริงเชิงเส้นที่ใช้ในการโหลดแบบยืดหยุ่น
ของอนุภาคและรูปแบบการใช้พลังงาน dashpot
เหือดหายไปในการชนไม่ยืดหยุ่น รูปแบบการติดต่อนี้ช่วยลดความยุ่งยาก
การคำนวณเพื่อให้สามารถจำนวนมากของอนุภาค
(107) ที่จะสร้างแบบจำลองแนบเนียน.
เพื่ออำนวยความสะดวกแบบจำลองที่นำเสนอเส้นทาง
แข็งเพียบถูกสร้างขึ้นในซอฟแวร์ของพวกเขา ที่แนบมากับ
เส้นทางนี้คือ 'ถัง' วัตถุบังคับให้หมุนรอบแกนแนวนอนขนานไป
แกนของลูกรอกหัว
หมุนถังควบคุมโดยคู่ของรายชื่อในฤดูใบไม้ผลิ น้ำพุ
ถูกวางตำแหน่งโดยพล 10 มม. ด้านบนและด้านล่าง 10 มม.
การแปล กรุณารอสักครู่..