Remove the filter.
8. Apply a film of clean transmission oil to the gasket of
the new filter and install. Make sure that the proper contact is made with the base.
9. Spin the breather (1), located on the top of the trans-
mission a few times. Change the filter if equipped.
10. If the breather is difficult to spin follow steps 11 and
12.
11. Remove the breather. Clean it with solvent and dry
with compressed air.
RCPH10WHL127AAH 3
12. Install the breather.
13. Check the oil level at the sight gauge.
14. Start the engine and check for oil leaks around the
filter and drain plug.
15. Bring the transmission oil up to working temperature,
and check the level again.